Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LLDPE MG200024 SABIC SAUDI
SABIC®
--
High mobility,low density
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | SABIC SAUDI/MG200024 |
---|---|---|---|
density | ASTM D-1505 | 0.924 g/cm³ | |
melt mass-flow rate | ASTM D-1238 | 20 g/10min |
thermal performance | Test Condition | Test Method | SABIC SAUDI/MG200024 |
---|---|---|---|
Brittle temperature | ASTM D-746 | <-75 °C | |
Vicat softening temperature | ASTM D-1525 | 94 °C |
mechanical properties | Test Condition | Test Method | SABIC SAUDI/MG200024 |
---|---|---|---|
Elongation at Break | ASTM D-638 | 450 % | |
Impact strength of cantilever beam gap | ASTM D-256 | 540 J/m | |
Secant modulus | 1%Strain | ASTM D-790 | 315 Mpa |
Shore hardness | ASTM D-2240 | 55 | |
tensile strength | Yield | ASTM D-638 | 12 Mpa |
Break | ASTM D-638 | 8.5 % |
other | Test Condition | Test Method | SABIC SAUDI/MG200024 |
---|---|---|---|
characteristic | 细粒树脂.优异低温韧性和ESCR性能、高光泽 | ||
purpose | 家用器皿、瓶盖、大型部件、工业容器、垃圾桶及汽车零件 |
Physical properties | Test Condition | Test Method | SABIC SAUDI/MG200024 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 0.924 | |
Environmental stress cracking resistance | 100%lgepal,F50 | ASTM D-1693A | 24 hrs |
melt mass-flow rate | ASTM D1238/ISO 1133 | 20.0 g/10min |