Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP 6130LX NC010 DUPONT JAPAN
ZENITE®
--
enhance,Glass fiber reinforced,Filler: Glass fiber reinf,30%,Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | DUPONT JAPAN/6130LX NC010 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 280 °C |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 6.2E-05 cm/cm/°C |
| MD | ISO 11359-2 | 5E-06 cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 335 °C |
| mechanical properties | Test Condition | Test Method | DUPONT JAPAN/6130LX NC010 |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 12800 Mpa |
| bending strength | 23°C | ISO 178 | 220 Mpa |
| Compressive stress | ISO 604 | 133 Mpa | |
| Tensile modulus | ISO 527-2/1A/1 | 15000 Mpa | |
| Tensile strain | Break | ISO 527-2/1A/5 | 2.0 % |
| tensile strength | Break | ISO 527-2/1A/5 | 145 Mpa |
| Electrical performance | Test Condition | Test Method | DUPONT JAPAN/6130LX NC010 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
| Dielectric strength | IEC 60243-1 | 34 KV/mm | |
| Dissipation factor | 1MHz | IEC 60250 | 0.031 |
| 2.05GHz | Internal Method | 6E-03 | |
| Relative permittivity | 2.05GHz | Internal Method | 4.27 |
| 1MHz | IEC 60250 | 4.00 | |
| Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | DUPONT JAPAN/6130LX NC010 |
|---|---|---|---|
| Shrinkage rate | MD | ISO 294-4 | 0.12 % |
| TD | ISO 294-4 | 0.60 % |
| impact performance | Test Condition | Test Method | DUPONT JAPAN/6130LX NC010 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 40 kJ/m² |
| flammability | Test Condition | Test Method | DUPONT JAPAN/6130LX NC010 |
|---|---|---|---|
| Extreme Oxygen Index | ISO 4589-2 | 51 % | |
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |
| 1.5mm | UL 94 | V-0 |