plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC 505RU-131 SABIC INNOVATIVE SHANGHAI

LEXAN™

Home appliance products,Automotive components

Bromine free flame retard,High transparency

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/505RU-131
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	137 °C
Hot deformation temperature		1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	136 °C
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	5E-05 cm/cm/°C
		TD：-40to40°C	ISO 11359-2	8.5E-05 cm/cm/°C
		TD：-40to40°C	ASTME831	7.4E-05 cm/cm/°C
		MD：-40to40°C	ISO 11359-2	5E-05 cm/cm/°C
Vicat softening temperature	--	ISO 306/B120	149 °C
			ASTM D152510	149 °C
		--	ISO 306/B50	147 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/505RU-131
Bending modulus	50.0mmSpan	ASTM D790	3200 Mpa
Bending modulus			ISO 178	3500 Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	114 Mpa
bending strength			ISO 178	122 Mpa
elongation	Break	ASTM D638	6.0 %
elongation		Yield	ASTM D638	4.0 %
Tensile modulus		ASTM D638	3600 Mpa
Tensile modulus			ISO 527-2/1	3500 Mpa
Tensile strain	Break	ISO 527-2/5	6.0 %
Tensile strain		Yield	ISO 527-2/5	3.0 %
tensile strength	Break	ISO 527-2/5	60.0 Mpa
		Yield	ASTM D638	74.0 Mpa
		Yield	ISO 527-2/5	72.0 Mpa
		Break	ASTM D638	62.0 Mpa

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/505RU-131
Compared to the anti leakage trace index		IEC 60112	PLC 3
Compared to the anti leakage trace index		CTI	UL 746	PLC 3
High arc combustion index	HAI	UL 746	PLC 0
Hot wire ignition	HWI	UL 746	PLC 3

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/505RU-131
melt mass-flow rate	300°C/1.2kg	ASTM D1238	8.0 g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	7.00 cm3/10min
Outdoor applicability		UL 746C	f1
Shrinkage rate	MD：3.20mm	Internal Method	0.40-0.60 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15 %
Water absorption rate		Saturation,23°C	ISO 62	0.30 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/505RU-131
Charpy Notched Impact Strength	23°C	ISO 179/1eA	10 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	7.0 kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	25.0 J
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	8.0 kJ/m²
Impact strength of cantilever beam gap		23°C	ISO 180/1A	10 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	NoBreak
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	NoBreak
Suspended wall beam without notch impact strength		-30°C	ISO 180/1U	73 kJ/m²

flammability	Test Condition	Test Method	SABIC INNOVATIVE SHANGHAI/505RU-131
Burning wire flammability index	0.75mm	IEC 60695-2-12	960 °C
Hot filament ignition temperature	3.0mm	IEC 60695-2-13	875 °C
Hot filament ignition temperature		1.0mm	IEC 60695-2-13	850 °C
UL flame retardant rating	0.75mm	UL 94	V-2
		3.0mm	UL 94	5VB5VA
		1.5mm	UL 94	V-0

Contact Us

Get App

Top