Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Jamplast JPLGABS Jamplast, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Jamplast, Inc./Jamplast JPLGABS |
|---|---|---|---|
| Dart impact | -18°C,2.54mm | ASTM D3029 | 19.8 J |
| 23°C,2.54mm | ASTM D3029 | 22.6 J | |
| Impact strength of cantilever beam gap | -18°C,3.18mm | ASTM D256 | 80 J/m |
| 23°C,3.18mm | ASTM D256 | 130 J/m |
| hardness | Test Condition | Test Method | Jamplast, Inc./Jamplast JPLGABS |
|---|---|---|---|
| Rockwell hardness | L计秤 | ASTM D785 | 80 |
| R级 | ASTM D785 | 108 |
| Mechanical properties | Test Condition | Test Method | Jamplast, Inc./Jamplast JPLGABS |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 50 % |
| Tensile modulus | ASTM D638 | 1860 MPa | |
| tensile strength | 断裂 | ASTM D638 | 31.7 MPa |
| Flexural modulus | ASTM D790 | 2210 MPa | |
| tensile strength | 屈服 | ASTM D638 | 30.3 MPa |
| bending strength | ASTM D790 | 62.1 MPa |
| flammability | Test Condition | Test Method | Jamplast, Inc./Jamplast JPLGABS |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Jamplast, Inc./Jamplast JPLGABS |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.40to0.70 % |
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 3.9 g/10min |
| density | ASTM D792 | 1.04 g/cm³ |
| Thermal performance | Test Condition | Test Method | Jamplast, Inc./Jamplast JPLGABS |
|---|---|---|---|
| vicat | ASTM D1525 | 104 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 96.1 °C |
Contact Us
Get App
Top