Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC LONOY lonoy 1200 Kingfa
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Kingfa/LONOY lonoy 1200 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 700 J/m |
| Suspended wall beam without notch impact strength | 23°C,3.20mm | ASTM D256 | 无断裂 |
| hardness | Test Condition | Test Method | Kingfa/LONOY lonoy 1200 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 115 |
| Mechanical properties | Test Condition | Test Method | Kingfa/LONOY lonoy 1200 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 80 % |
| tensile strength | ASTM D638 | 55.0 MPa | |
| Flexural modulus | ASTM D790 | 2200 MPa | |
| bending strength | ASTM D790 | 80.0 MPa |
| Electrical performance | Test Condition | Test Method | Kingfa/LONOY lonoy 1200 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+17 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1E+15 ohms | |
| dielectric strength | 1.60mm | ASTM D149 | 28 kV/mm |
| physical property | Test Condition | Test Method | Kingfa/LONOY lonoy 1200 |
|---|---|---|---|
| melt mass-flow rate | 260°C/5.0kg | ASTM D1238 | 45 g/10min |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.12 % |
| Shrinkage rate | MD：23°C | ASTM D955 | 0.60to0.80 % |
| density | ASTM D792 | 1.23 g/cm³ |
| Thermal performance | Test Condition | Test Method | Kingfa/LONOY lonoy 1200 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 83.0 °C |
| 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 110 °C |
Contact Us
Get App
Top