Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 B3EG6 UNCOLORED BASF SHANGHAI
Ultramid®
Electronic insulation,Industrial applications,Industrial applications,Electronic insulation
Oil resistant,Filler: Glass fiber reinf,30% filler by weight,30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | BASF SHANGHAI/B3EG6 UNCOLORED |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 181 Mpa |
thermal performance | Test Condition | Test Method | BASF SHANGHAI/B3EG6 UNCOLORED |
---|---|---|---|
Hot deformation temperature | 0.45MPaUnannealed | ISO 75-2/Bf | 220 °C |
1.80MPaAnnealed | ISO 75-2/Af | 210 °C | |
Vicat softening temperature | Melting Temperature | ISO 11357-3 | 220 °C |
flame retardant performance | Test Condition | Test Method | BASF SHANGHAI/B3EG6 UNCOLORED |
---|---|---|---|
Ignition temperature of heating wire | 3.00mm | IEC 60695-2-12 | 750 °C |
2.00mm | IEC 60695-2-12 | 800 °C | |
1.00mm | IEC 60695-2-12 | 750 °C | |
Relative temperature of heating wire | 1.00mm | IEC 60695-2-13 | 725 °C |
3.00mm | IEC 60695-2-13 | 725 °C | |
2.00mm | IEC 60695-2-13 | 775 °C | |
UL flame retardant rating | UL -94 | HB 2.00mm | |
UL -94 | HB 1.50mm | ||
UL -94 | HB 3.00mm |
mechanical properties | Test Condition | Test Method | BASF SHANGHAI/B3EG6 UNCOLORED |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 8600 Mpa |
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
Elongation at Break | 23°C | ISO 527-2 | 3.0 % |
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 10 kJ/m² |
-30°C | ISO 180/1A | 8.4 kJ/m² | |
Tensile modulus | 23°C | ISO 527-2 | 9500 Mpa |
tensile strength | 23°C | ISO 527-2 | 180 Mpa |
Electrical performance | Test Condition | Test Method | BASF SHANGHAI/B3EG6 UNCOLORED |
---|---|---|---|
Dielectric constant | 23°C | IEC 60250 | 3.80 1MHz |
Dissipation factor | 相对漏电起痕指数 | IEC 60112 | 550 V |
23°C | IEC 60250 | 0.025 1MHz | |
23°C | IEC 60250 | 0.025 100HZ | |
Volume resistivity | IEC 60093 | 1E+13 Ω.cm |
Physical properties | Test Condition | Test Method | BASF SHANGHAI/B3EG6 UNCOLORED |
---|---|---|---|
density | ISO 1183 | 1.36 g/cm³ | |
Water absorption rate | (23°C,24hr) | ISO 62 | 6.00 % |
(23°C,50RH) | ISO 62 | 2.10 % |