Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS PRL PC/ABS-GP1 Polymer Resources Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Polymer Resources Ltd./PRL PC/ABS-GP1 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -30°C,3.18mm | ASTM D256 | 530 J/m |
| Dart impact | 3.18mm | ASTM D3029 | 36.2 J |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 640 J/m |
| Mechanical properties | Test Condition | Test Method | Polymer Resources Ltd./PRL PC/ABS-GP1 |
|---|---|---|---|
| Flexural modulus | 3.18mm | ASTM D790 | 2280 MPa |
| tensile strength | 屈服,3.18mm | ASTM D638 | 57.9 MPa |
| 断裂,3.18mm | ASTM D638 | 56.5 MPa | |
| bending strength | 3.18mm | ASTM D790 | 86.2 MPa |
| physical property | Test Condition | Test Method | Polymer Resources Ltd./PRL PC/ABS-GP1 |
|---|---|---|---|
| density | ASTM D792 | 1.15 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.50to0.70 % |
| melt mass-flow rate | 250°C/5.0kg | ASTM D1238 | 3.0to14 g/10min |
| Thermal performance | Test Condition | Test Method | Polymer Resources Ltd./PRL PC/ABS-GP1 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,3.18mm，HDT | ASTM D648 | 121 °C |
| 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 107 °C |
Contact Us
Get App
Top