Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A218WV35 SOLVAY SHANGHAI
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodSOLVAY SHANGHAI/A218WV35
Impact strength of simply supported beam without notch23°CISO 179/1eU25 kJ/m²
Mechanical propertiesTest ConditionTest MethodSOLVAY SHANGHAI/A218WV35
Tensile modulus23°CISO 527-2/1A4500 Mpa
Tensile strain断裂, 23°CISO 527-27.0 %
Flexural modulus23°CISO 1783850 Mpa
tensile strength 断裂, 23°CISO 527-2/1A80.0 Mpa
Electrical performanceTest ConditionTest MethodSOLVAY SHANGHAI/A218WV35
dielectric strength2.00 mmIEC 60243-130 KV/mm
Dissipation FactorIEC 602500.020
Compared to the Leakage Tracking Index (CTI)解决方案 AIEC 60112 V
Volume resistivityIEC 600935.0E+14 ohms·cm
Surface ResistivityIEC 600935.0E+14 ohms
flammabilityTest ConditionTest MethodSOLVAY SHANGHAI/A218WV35
Limiting Oxygen IndexISO 4589-225 %
physical property Test ConditionTest MethodSOLVAY SHANGHAI/A218WV35
Water absorption rate平衡, 23°C, 50% RHISO 621.6 %
24 hr, 23°CISO 620.75 %
Shrinkage rate流量ISO 294-41.1 %
横向流量ISO 294-41.1 %
Thermal performanceTest ConditionTest MethodSOLVAY SHANGHAI/A218WV35
melting temperatureISO 11357-3263 °C
injectionTest ConditionTest MethodSOLVAY SHANGHAI/A218WV35
Suggested maximum moisture content0.20 %
Temperature in the middle of the barrel275 to 285 °C
Temperature at the rear of the barrel270 to 280 °C
drying temperature80 °C
Temperature at the front of the material cylinder280 to 290 °C
Temperature70 to 100 °C

Contact Us

Get App

Top