Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS C2950HF-111 SABIC INNOVATIVE CHONGQING
CYCOLOY™
Electrical field、Electronic field、Household appliances、Household appliances、Automotive sector
Flame retardant、High mobility、High impact resistance、High temperature resistan、heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/C2950HF-111 |
|---|---|---|---|
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 54.2 J |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/C2950HF-111 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 121 |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/C2950HF-111 |
|---|---|---|---|
| Flexural modulus | 100mmSpan | ASTM D790 | 2590 Mpa |
| bending strength | Yield,100mmSpan | ASTM D790 | 96.5 Mpa |
| elongation | 断裂 | ASTM D638 | 40 % |
| 屈服 | ASTM D638 | 5.0 % | |
| tensile strength | 屈服 | ASTM D638 | 64.1 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/C2950HF-111 |
|---|---|---|---|
| Dissipation Factor | 50Hz | ASTM D150 | 5.2E-03 |
| 60Hz | ASTM D150 | 5.2E-03 | |
| dielectric constant | 60Hz | ASTM D150 | 2.80 |
| Volume resistivity | ASTM D257 | 1.6E+17 ohms·cm | |
| dielectric constant | 50Hz | ASTM D150 | 2.80 |
| Dissipation Factor | 1MHz | ASTM D150 | 7.1E-03 |
| Surface Resistivity | ASTM D257 | >1.0E+16 ohms | |
| High arc combustion index (HAI) | HAI | UL 746 | PLC 0 |
| dielectric constant | 1MHz | ASTM D150 | 2.70 |
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 3 |
| dielectric strength | 3.20mm,inOil | ASTM D149 | 24 KV/mm |
| Hot wire ignition (HWI) | HWI | UL 746 | PLC 2 |
| arc resistance | ASTM D495 | PLC6 | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 2 |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/C2950HF-111 |
|---|---|---|---|
| UL flame retardant rating | 3.4mm | UL 94 | 5VA |
| 0.76mm | UL 94 | V-2 | |
| 2.5mm | UL 94 | 5VB | |
| 1.5mm | UL 94 | V-0 | |
| Limiting Oxygen Index | ASTM D2863 | 30 % |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/C2950HF-111 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.40-0.60 % |
| melt mass-flow rate | 260°C/2.16kg | ASTM D1238 | 22 g/10min |
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| 平衡,23°C | ASTM D570 | 0.40 % | |
| Shrinkage rate | TD：3.20mm | 内部方法 | 0.40-0.60 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE CHONGQING/C2950HF-111 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 93.3 °C |
| Linear coefficient of thermal expansion | MD：-30到30°C | ASTM D696 | 7.2E-05 cm/cm/°C |
| vicat | ASTM D15254 | 113 °C | |
| thermal conductivity | ASTMC177 | 0.20 W/m/K | |
| Linear coefficient of thermal expansion | TD：-30to30°C | ASTM D696 | 7.2E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 102 °C |
| RTI Imp | UL 746 | 85.0 °C | |
| RTI Str | UL 746 | 85.0 °C | |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 87.8 °C |
| RTI Elec | UL 746 | 85.0 °C |
Contact Us
Get App
Top