Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66/6 PENTAMID AB GV30 H natural PENTAC Polymer GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | PENTAC Polymer GmbH/PENTAMID AB GV30 H natural |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃ | kJ/m² | 10.679to23.215 |
| Charpy Notched Impact Strength | 23℃ | kJ/m² | 0.556to4.643 |
| Impact strength of cantilever beam gap | 23℃ | kJ/m² | 1.988to6.176 |
| hardness | Test Condition | Test Method | PENTAC Polymer GmbH/PENTAMID AB GV30 H natural |
|---|---|---|---|
| ball-indentation hardness | 45.03to201.38 Mpa | ||
| Shore hardness | 23℃ | 77to80 |
| Mechanical properties | Test Condition | Test Method | PENTAC Polymer GmbH/PENTAMID AB GV30 H natural |
|---|---|---|---|
| Nominal tensile fracture strain | 23℃ | % | 5,6到50 |
| yield | % | 3,0到21 | |
| fracture | % | 2,2到12 | |
| yield | 39.03to89.66 Mpa | ||
| Tensile modulus | 23℃ | 477.24到0.01,0.04E0.05 Mpa | |
| coefficient of friction | 0.30-1.0 | ||
| fracture | 79.31to84.83 Mpa |
| Electrical performance | Test Condition | Test Method | PENTAC Polymer GmbH/PENTAMID AB GV30 H natural |
|---|---|---|---|
| Surface Resistivity | ohms | 1.0E+2-2.5E+13 | |
| Compared to the Leakage Tracking Index (CTI) | V | PLC 0 | |
| Volume resistivity | 相对电容率(23℃) | 3.50 | |
| Dissipation Factor | 23℃ | 0.020-0.30 |
| flammability | Test Condition | Test Method | PENTAC Polymer GmbH/PENTAMID AB GV30 H natural |
|---|---|---|---|
| Limiting Oxygen Index | % | 21to28 | |
| Hot filament ignition temperature | °C | 743to960 | |
| Burning wire flammability index | °C | 954to960 |
| physical property | Test Condition | Test Method | PENTAC Polymer GmbH/PENTAMID AB GV30 H natural |
|---|---|---|---|
| balance | % | 2.5 | |
| flow | mm/mm | 152.4E-3-0.635 | |
| melt mass-flow rate | 235°C/1.0kg | g/10min | 1.2-5.0 |
| viscosity number | cm³/g | 138to247 | |
| saturation | % | 9.0 | |
| Apparent density | g/cm³ | 0.70-0.78 |
| Thermal performance | Test Condition | Test Method | PENTAC Polymer GmbH/PENTAMID AB GV30 H natural |
|---|---|---|---|
| vicat | °C | 67to247 | |
| Continuous use temperature | °C | 87to202 | |
| flow | mm/mm/°C | 96.5E-5-152.4E-5 | |
| horizontal | mm/mm/°C | 99.1E-5-203.2E-5 |
Contact Us
Get App
Top