Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 ADDINYL B2 E ADDIPLAST FRANCE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDINYL B2 E |
|---|---|---|---|
| Charpy Notched Impact Strength | kJ/m² | 3.0 10 | |
| Impact strength of cantilever beam gap | kJ/m² | 3.0 10 | |
| Impact strength of simply supported beam without notch | 无断裂 |
| hardness | Test Condition | Test Method | ADDIPLAST FRANCE/ADDINYL B2 E |
|---|---|---|---|
| Shore hardness | 邵氏D | 83 77 |
| Electrical performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDINYL B2 E |
|---|---|---|---|
| Surface Resistivity | ohms | 1E+14 1E+12 | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | V | PLC 0 |
| Volume resistivity | ohms·cm | 1E+15 1E+12 | |
| dielectric strength | kV/mm | 26 -- |
| Mechanical properties | Test Condition | Test Method | ADDIPLAST FRANCE/ADDINYL B2 E |
|---|---|---|---|
| Flexural modulus | MPa | 3000 1000 | |
| tensile strength | 断裂 | MPa | 60.0 45.0 |
| 屈服 | MPa | 75.0 40.0 | |
| Tensile strain | 断裂 | % | 10 30 |
| flammability | Test Condition | Test Method | ADDIPLAST FRANCE/ADDINYL B2 E |
|---|---|---|---|
| Limiting Oxygen Index | % | 30 -- | |
| UL flame retardant rating | 1.6mm | V-2 -- | |
| Hot filament ignition temperature | °C | 960 -- |
| physical property | Test Condition | Test Method | ADDIPLAST FRANCE/ADDINYL B2 E |
|---|---|---|---|
| density | g/cm³ | 1.17 -- |
| Thermal performance | Test Condition | Test Method | ADDIPLAST FRANCE/ADDINYL B2 E |
|---|---|---|---|
| melting temperature | °C | 220 -- | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | °C | 65.0 -- |
Contact Us
Get App
Top