plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC/PBT 420SE0-BK1066 SABIC INNOVATIVE NANSHA

VALOX™ Resin

Trimming machine,Food mixer motor stator and commutator,Electric fan,Laptop case,Spool,Switches, etc

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420SE0-BK1066
Hot deformation temperature	0.45 MPa, 3.2 mm, Unannealed	ASTM D 648	212 °C
		0.45 MPa, 3.2 mm, unannealed （未 Annealed）	ASTM D 648	212 °C
		1.82 MPa, 3.2mm, Unannealed	ASTM D 648	200 °C
		1.82 MPa, 3.2mm, unannealed （Unannealed）	ASTM D 648	200 °C
		0.45 MPa, 6.4 mm，Unannealed	ASTM D 648	215 °C
		0.45 MPa, 6.4 mm， unannealed （Unannealed）	ASTM D 648	215 °C
		1.82 MPa, 6.4 mm, unannealed （Unannealed）	ASTM D 648	204 °C
		1.82 MPa, 6.4 mm, Unannealed	ASTM D 648	204 °C
Linear coefficient of thermal expansion	-40℃ to 4O℃,flow （Flow）	ASTM E 831	0.0000252 1/℃
		-40℃-4O℃, Flow	ASTM E 831	0.0000252 1/℃
		60℃-138℃, Flow	ASTM E 831	0.0000252 1/℃
		60℃ to 138℃, flow （Flow）	ASTM E 831	0.0000252 1/℃
Relative Temp Index, Meeh w/impact	相对热指数，机械冲击性能	UL 746B	130 °C
Relative Temp Index, Meeh w/o impact	相对热指数，非机械冲击性能	UL 746B	140 °C
Relative Temp Index. Elec	相对热指数，电性能	UL 746B	130 °C
Vicat softening temperature	维卡软化温度，等级 B/50	ASTM D 1525	200 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420SE0-BK1066
Bending modulus	挠曲模量，1.3 mm/min, 50 mm span	ASTM D 790	9400 Mpa
Bending modulus		1.3 mm/min, 50 mm span	ASTM D 790	9400 Mpa
bending strength	Break,1.3 mm/min, 50 mm span	ASTM D 790	186 Mpa
elongation	Yield,类型L, 5 mm/min	ASTM D 638	1.2 %
elongation		Break，类型L, 5 mm/min	ASTM D 638	1.2 %
Flexural Stress, brk	弯曲强度，Break,1.3 mm/min, 50 mm span	ASTM D 790	186 Mpa
Rockwell hardness	洛氏硬度 R	ASTM D 785	119 -
Rockwell hardness		R	ASTM D 785	119 -
Tensile modulus	拉伸模量,5 mm/min	ASTM D 638	11500 Mpa
Tensile modulus		5 mm/min	ASTM D 638	11500 Mpa
Tensile strength	Break，类型L, 5 mm/min	ASTM D 638	95 Mpa
Tensile strength		Yield，类型L，5 mm/min	ASTM D 638	95 Mpa
Tensile stress	抗张程度，Break，类型L, 5 mm/min，Yield	ASTM D 638	95 Mpa
		拉伸伸长,Break，类型L, 5 mm/min，Yield	ASTM D 638	1.2 %
		拉伸伸长,Yield,类型L, 5 mm/min	ASTM D 638	1.2 %
		抗张程度，Yield，类型L，5 mm/min	ASTM D 638	95 Mpa

Physical property type	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420SE0-BK1066
Test project	测试条件	测试方法	测试结果测试单位

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/420SE0-BK1066
Bi Rong		ASTM D 792	0.62 cm³/g
density		ASTM D 792	1.61 —
density			ASTM D792	1.3 g/cm³
Shrinkage rate	Across Flow ,1.5-3.2 mm	SABIC method	0.4 - 0.6 %
		Flow, 1.5-3.2 mm	SABIC method	0.3 - 0.5 %
		Flow，3.2 mm	SABIC method	0.5 - 0.7 %
		Flow，3.2-4.6 mm	SABIC method	0.5 - 0.8 %
		Across Flow，3.2-4.6mm	SABIC method	0.6-1 %
Water absorption rate	23℃ 24hr	ASTM D570	1.3 %
Water absorption rate		24 hours	ASTM D 570	0.06 %

Contact Us

Get App

Top