Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 TechnoMid PA6 S GF 15 GL TECHNOCOMPOUND GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoMid PA6 S GF 15 GL |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.5 kJ/m² |
-30°C | ISO 179/1eA | 5.0 kJ/m² | |
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 48 kJ/m² |
-30°C | ISO 179/1eU | 43 kJ/m² |
hardness | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoMid PA6 S GF 15 GL |
---|---|---|---|
ball-indentation hardness | ISO 2039-1 | 170 MPa |
Mechanical properties | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoMid PA6 S GF 15 GL |
---|---|---|---|
tensile strength | 断裂 | ISO 527-2/5 | 130 MPa |
Tensile strain | 断裂 | ISO 527-2/5 | 4.0 % |
Tensile modulus | ISO 527-2/1 | 5600 MPa | |
Tensile strain | 屈服 | ISO 527-2/50 | 4.0 % |
tensile strength | 屈服 | ISO 527-2/50 | 130 MPa |
Electrical performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoMid PA6 S GF 15 GL |
---|---|---|---|
dielectric strength | 1.00mm | IEC 60243-1 | 40 kV/mm |
relative permittivity | 1MHz | IEC 60250 | 3.70 |
flammability | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoMid PA6 S GF 15 GL |
---|---|---|---|
UL flame retardant rating | 0.8mm | UL 94 | HB |
physical property | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoMid PA6 S GF 15 GL |
---|---|---|---|
Shrinkage rate | TD | ISO 294-4 | 0.60 % |
MD | ISO 294-4 | 0.15 % | |
viscosity number | ISO 307 | 150 cm³/g | |
Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 2.7 % |
饱和,23°C | ISO 62 | 7.0 % | |
density | ISO 1183 | 1.22 g/cm³ |
Thermal performance | Test Condition | Test Method | TECHNOCOMPOUND GERMANY/TechnoMid PA6 S GF 15 GL |
---|---|---|---|
melting temperature | ISO 11357-3 | 220 °C | |
Linear coefficient of thermal expansion | TD:23到80°C | ISO 11359-2 | 1.0E-4到1.3E-4 cm/cm/°C |
vicat | ISO 306/B120 | 210 °C | |
Heat distortion temperature | 1.8MPa,未退火,HDT | ISO 75-2/A | 195 °C |
Linear coefficient of thermal expansion | MD:23到80°C | ISO 11359-2 | 4.0E-5到6.0E-5 cm/cm/°C |
Heat distortion temperature | 8.0MPa,未退火,HDT | ISO 75-2/C | 65.0 °C |
Contact Us
Get App
Top