Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC PC-115P TAIWAN CHIMEI
WONDERLITE®
Medical applications,Medical device accessories
High mobility,Gamma ray resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | TAIWAN CHIMEI/PC-115P |
|---|---|---|---|
| tensile strength | 屈服 | ISO 527-2/50 | 64.0 Mpa |
| bending strength | ISO 178 | 90.0 Mpa | |
| Flexural modulus | ISO 178 | 2400 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 120 % |
| tensile strength | 断裂 | ISO 527-2/50 | 70.0 Mpa |
| flammability | Test Condition | Test Method | TAIWAN CHIMEI/PC-115P |
|---|---|---|---|
| UL flame retardant rating | 2.5 mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | TAIWAN CHIMEI/PC-115P |
|---|---|---|---|
| Melt volume flow rate | 300°C/1.2 kg | ISO 1133 | 15.0 cm3/10min |
| Shrinkage rate | ISO 294-4 | 0.50 - 0.70 % |
| Thermal performance | Test Condition | Test Method | TAIWAN CHIMEI/PC-115P |
|---|---|---|---|
| vicat | -- | ISO 306/A50 | 150 °C |
| Heat distortion temperature | 1.8 MPa, 退火，HDT | ISO 75-2/A | 143 °C |
| 1.8 MPa, 未退火，HDT | ISO 75-2/A | 128 °C | |
| vicat | -- | ISO 306/B50 | 145 °C |
| Linear coefficient of thermal expansion | 流动 | ISO 11359-2 | 6.0E-5 - 8.0E-5 cm/cm/°C |
| injection | Test Condition | Test Method | TAIWAN CHIMEI/PC-115P |
|---|---|---|---|
| drying time | 4.0 hr | ||
| Temperature in the middle of the barrel | 250 to 310 °C | ||
| Temperature at the rear of the barrel | 230 to 300 °C | ||
| drying temperature | 120 °C | ||
| Temperature at the front of the material cylinder | 250 to 300 °C | ||
| Temperature | 70 to 120 °C |
Contact Us
Get App
Top