Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6T/66 FR95G25V0 NC010 DUPONT USA
Zytel®
currency,Industrial applications
Filler: Glass fiber reinf,25% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | DUPONT USA/FR95G25V0 NC010 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 233 °C |
Melting temperature | ISO 11357-3 | 267 °C | |
RTI Elec | 0.75mm | UL 746 | 160 °C |
1.5mm | UL 746 | 160 °C | |
3.0mm | UL 746 | 160 °C | |
0.40mm | UL 746 | 160 °C | |
TemperatureIndex | TensileStrength,5000hr | IEC 60216 | 190 °C |
TensileStrength,20000hr | IEC 60216 | 160 °C |
mechanical properties | Test Condition | Test Method | DUPONT USA/FR95G25V0 NC010 |
---|---|---|---|
Bending modulus | ISO 178 | 9000 Mpa | |
bending strength | ISO 178 | 185 Mpa | |
Tensile modulus | ISO 527-2 | 8900 Mpa | |
Tensile strain | Break | ISO 527-2 | 2.2 % |
tensile strength | Break | ISO 527-2 | 109 Mpa |
Electrical performance | Test Condition | Test Method | DUPONT USA/FR95G25V0 NC010 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
Dielectric strength | IEC 60243-1 | 37 KV/mm | |
Surface resistivity | IEC 60093 | -- ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | DUPONT USA/FR95G25V0 NC010 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.10 % |
TD | ISO 294-4 | 0.60 % | |
Top out temperature | 210 °C | ||
Water absorption rate | Saturation,23°C,2.00mm | ISO 62 | 4.0 % |
impact performance | Test Condition | Test Method | DUPONT USA/FR95G25V0 NC010 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 35 kJ/m² |
flammability | Test Condition | Test Method | DUPONT USA/FR95G25V0 NC010 |
---|---|---|---|
Burning rate | 1.00mm | ISO 3795 | <100 mm/min |
Extreme Oxygen Index | ISO 4589-2 | 32 % | |
FMVSS flammability | FMVSS302 | B | |
UL flame retardant rating | 0.75mm | UL 94 | V-0 |
0.75mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | IEC 60695-11-10,-20 | V-0 | |
1.5mm | UL 94 | V-0 |