Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPA AFA-6145 V0 Z USA Suwei
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Mechanical properties | Test Condition | Test Method | USA Suwei/AFA-6145 V0 Z |
---|---|---|---|
Tensile modulus | ASTM D638 | -- MPa | |
Flexural modulus | ASTM D790 | 15500 MPa | |
bending strength | ASTM D790 | 276 MPa | |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eU | 33.1 KJ/m2 |
elongation | break | ASTM D638 | 1.5 % |
Impact strength of cantilever beam gap | ASTM D256 | 107 J/m | |
tensile strength | ASTM D527-2 | 193 MPa | |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 7.8 KJ/m2 |
Electrical performance | Test Condition | Test Method | USA Suwei/AFA-6145 V0 Z |
---|---|---|---|
Dielectric loss | 1MHZ | ASTM D150 | 0.011 |
Volume resistivity | ASTM D257 | 1E+15 ohm*cm | |
dielectric strength | ASTM D149 | 23 KV/mm | |
dielectric constant | 1MHZ | ASTM D150 | 4.10 |
other | Test Condition | Test Method | USA Suwei/AFA-6145 V0 Z |
---|---|---|---|
UL flame retardant rating | 0.794mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | USA Suwei/AFA-6145 V0 Z |
---|---|---|---|
Shrinkage rate | 流动 | ASTM D955 | 0.2 % |
横向 | ASTM D955 | 0.4 % | |
density | ASTM D792 | 1.8 g/cm3 |
Thermal performance | Test Condition | Test Method | USA Suwei/AFA-6145 V0 Z |
---|---|---|---|
melting temperature | ASTM D3418 | 310 ℃ | |
Heat distortion temperature | 1.8MPa,退火,,HDT | ASTM D648 | 277 ℃ |
Contact Us
Get App
Top