Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 RTP 200 AR 15 TFE 15 SI 2 RTP US
--
--
Filler, aromatic polyamide fiber, 15%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 200 AR 15 TFE 15 SI 2 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 510 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 48 J/m |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 200 AR 15 TFE 15 SI 2 |
|---|---|---|---|
| Primary Additive | 15 % |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 200 AR 15 TFE 15 SI 2 |
|---|---|---|---|
| tensile strength | ASTM D638 | 75.8 MPa | |
| elongation | 屈服 | ASTM D638 | 5.0to9.0 % |
| Flexural modulus | ASTM D790 | 3450 MPa | |
| Tensile modulus | ASTM D638 | 3450 MPa | |
| bending strength | ASTM D790 | 114 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP 200 AR 15 TFE 15 SI 2 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| physical property | Test Condition | Test Method | RTP US/RTP 200 AR 15 TFE 15 SI 2 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.90to1.8 % |
| water content | 0.20 % | ||
| density | ASTM D792 | 1.26 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 200 AR 15 TFE 15 SI 2 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 149 °C |
Contact Us
Get App
Top