Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HIPS NS-250 IDEMITSU MALASIA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodIDEMITSU MALASIA/NS-250
Impact strength of cantilever beam gapASTM D25669 J/m
Mechanical propertiesTest ConditionTest MethodIDEMITSU MALASIA/NS-250
elongation断裂ASTM D63835 %
tensile strength ASTM D63825.5 MPa
flammabilityTest ConditionTest MethodIDEMITSU MALASIA/NS-250
UL flame retardant rating1.50 mmUL 94V-0
squeeze outTest ConditionTest MethodIDEMITSU MALASIA/NS-250
drying temperature70.0 °C
die temperature190 to 220 °C
drying time1.0 to 2.0 hr
Barrel Temperature200 to 240 °C
physical property Test ConditionTest MethodIDEMITSU MALASIA/NS-250
densityASTM D7921.15 g/cm³
melt mass-flow rate200°C/5.0 kgASTM D123815 g/10 min
injectionTest ConditionTest MethodIDEMITSU MALASIA/NS-250
drying time1.0 to 2.0 hr
Temperature in the middle of the barrel190 to 220 °C
Temperature at the rear of the barrel180 to 210 °C
drying temperature70.0 °C
Temperature at the front of the material cylinder210 to 240 °C
Temperature40.0 to 60.0 °C
Spray nozzle temperature200 to 230 °C

Contact Us

Get App

Top