Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC GN-3610ZL TEIJIN SHANGHAI
--
Industrial applications,Electrical/Electronic Applications,Electrical components
Filler: Glass fiber reinf,10% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | TEIJIN SHANGHAI/GN-3610ZL |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 138 °C |
1.8MPa,Unannealed | ISO 75-2/A | 134 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 6E-05 cm/cm/°C |
MD | ISO 11359-2 | 4E-05 cm/cm/°C | |
RTI Elec | 1.5mm | UL 746 | 80.0 °C |
RTI Imp | 1.5mm | UL 746 | 80.0 °C |
RTI Str | 1.5mm | UL 746 | 80.0 °C |
Vicat softening temperature | ISO 306/B50 | 140 °C |
mechanical properties | Test Condition | Test Method | TEIJIN SHANGHAI/GN-3610ZL |
---|---|---|---|
Bending modulus | ISO 178 | 3600 Mpa | |
bending strength | ISO 178 | 115 Mpa | |
Tensile strain | Break | ISO 527-2/5 | 3.0 % |
tensile strength | Break | ISO 527-2/5 | 67.0 Mpa |
Electrical performance | Test Condition | Test Method | TEIJIN SHANGHAI/GN-3610ZL |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 3 | |
Dielectric constant | 1MHz | IEC 60250 | 3.20 |
100Hz | IEC 60250 | 3.20 | |
Dielectric strength | IEC 60243-1 | 35 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 9E-03 |
100Hz | IEC 60250 | 1E-03 | |
Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | TEIJIN SHANGHAI/GN-3610ZL |
---|---|---|---|
density | ISO 1183 | 1.27 g/cm³ | |
Shrinkage rate | MD:4.00mm | Internal Method | 0.30-0.50 % |
TD:4.00mm | Internal Method | 0.40-0.60 % | |
Water absorption rate | 23°C,24hr | ISO 62 | 0.16 % |
impact performance | Test Condition | Test Method | TEIJIN SHANGHAI/GN-3610ZL |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 42 kJ/m² |
flammability | Test Condition | Test Method | TEIJIN SHANGHAI/GN-3610ZL |
---|---|---|---|
Burning wire flammability index | 1.6mm | IEC 60695-2-12 | 960 °C |
3.0mm | IEC 60695-2-12 | 960 °C | |
1.0mm | IEC 60695-2-12 | 960 °C | |
Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 850 °C |
1.0mm | IEC 60695-2-13 | 825 °C | |
1.6mm | IEC 60695-2-13 | 850 °C | |
UL flame retardant rating | 1.0mm | UL 94 | V-1 |
1.6mm | UL 94 | V-0 | |
0.40mm | UL 94 | V-2 |