Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPEE CM550-S DSM HOLAND
Arnitel®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | DSM HOLAND/CM550-S |
---|---|---|---|
Shore hardness | Shore D, 15 Sec | ISO 868 | 57 |
Shore A, 15 Sec | ISO 868 | 97 | |
Shore A, 3 Sec | ISO 868 | 98 | |
Shore D, 3 Sec | ISO 868 | 57 |
thermal performance | Test Condition | Test Method | DSM HOLAND/CM550-S |
---|---|---|---|
Melting temperature | ISO 11357-3 | 205 °C | |
Vicat softening temperature | ISO 306/B50 | 71.0 °C |
mechanical properties | Test Condition | Test Method | DSM HOLAND/CM550-S |
---|---|---|---|
Nominal tensile fracture strain | ISO 527-2 | 430 % | |
Tensile modulus | ISO 527-2 | 205 Mpa | |
tensile strength | 100% Strain | ISO 527-2 | 17.0 Mpa |
5.0% Strain | ISO 527-2 | 9.70 Mpa | |
50% Strain | ISO 527-2 | 18.0 Mpa | |
Break | ISO 527-2 | 27.0 Mpa | |
10% Strain | ISO 527-2 | 14.0 Mpa |
Electrical performance | Test Condition | Test Method | DSM HOLAND/CM550-S |
---|---|---|---|
Dissipation factor | 100 Hz | IEC 60250 | 0.018 |
1 MHz | IEC 60250 | 0.050 | |
Relative permittivity | 100 Hz | IEC 60250 | 4.20 |
1 MHz | IEC 60250 | 3.50 | |
Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | DSM HOLAND/CM550-S |
---|---|---|---|
Melt Volume Flow Rate (MVR) | 230°C/2.16 kg | ISO 1133 | 17.0 cm3/10min |
Water absorption rate | Equilibrium, 23°C, 50% RH | ISO 62 | 0.11 % |