Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS PC-540J01 TAIWAN CHIMEI
WONDERLOY®
Automotive sector、Electronic field、Electrical field、Home appliance components
heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TAIWAN CHIMEI/PC-540J01 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -30℃ (-22℉) | ISO 180 | 12 |
| 23℃ (73℉) | ISO 180 | 40 | |
| 23℃ (73℉) | ASTM D256 | 52 | |
| Charpy Notched Impact Strength | -30℃ (-22℉) | ISO 179 | 12 kJ/m² |
| 23℃ (73℉) | ISO 179 | 40 kJ/m² |
| hardness | Test Condition | Test Method | TAIWAN CHIMEI/PC-540J01 |
|---|---|---|---|
| Hardness (Rockwell R) | 23℃ | ASTM D785 | 119 R |
| 23℃ | ISO 2039-2 | 119 R |
| Electrical Property | Test Condition | Test Method | TAIWAN CHIMEI/PC-540J01 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 390000000000000000 Ohm-m | |
| Surface Resistivity | IEC 60093 | 290000000000000000 Ohm | |
| dielectric constant | IEC 60250 | 3.1 - |
| Mechanical properties | Test Condition | Test Method | TAIWAN CHIMEI/PC-540J01 |
|---|---|---|---|
| elongation at break | 50mm/m | ASTM D638 | 1 |
| 50mm/m | ISO 527 | 1.2 | |
| bending strength | 2mm/mi | ISO 178 | 90 Mpa |
| tensile strength | 50mm/mi，断裂 | ISO 527 | 55 Mpa |
| 50mm/mi，屈服 | ISO 527 | 60 Mpa | |
| bending strength | 1.3mm/m | ASTM D790 | 900 kg/cm2 |
| Flexural modulus | 2mm/m | ISO 178 | 2500 Mpa |
| 1.3mm/m | ASTM D790 | 25000 kg/cm2 | |
| tensile strength | 50mm/mi，屈服 | ASTM D638 | 600 kg/cm2 |
| combustibility | Test Condition | Test Method | TAIWAN CHIMEI/PC-540J01 |
|---|---|---|---|
| UL flame retardant rating | 5VA | UL 94 | 3 mm |
| UL fire rating V | UL 94 | 1.5 mm | |
| UL fire rating 5VB | UL 94 | 2 mm |
| Thermal Properties | Test Condition | Test Method | TAIWAN CHIMEI/PC-540J01 |
|---|---|---|---|
| vicat | 1KG,50℃/ | ASTM D1525 | 107 °C |
| 1KG,50℃ | ISO 306 | 107 °C | |
| Linear coefficient of thermal expansion | Flow:23-5，流动 | ISO 11359-2 | 80 °C |
| vicat | 5KG,50℃ | ISO 306 | 101 °C |
| 5KG,50℃ | ASTM D1525 | 101 °C |
| physical property | Test Condition | Test Method | TAIWAN CHIMEI/PC-540J01 |
|---|---|---|---|
| melt mass-flow rate | 260°C/2.16 kg | ASTM D1238 | 21 g/10min |
| Melt volume flow rate | 260°C/2.16 kg | ISO 1133 | 20 cm³/10 min |
| melt mass-flow rate | 260°C/2.16 kg | ISO 1133 | 21 |
| Shrinkage rate | ASTM D 955 | 0.4-0.6 % |
Contact Us
Get App
Top