Material Comparison
Add Comparison Model
Select Products for Comparison (1/4)
Highlight Differences
Hide Same
Product Name / Manufacturer / Model
Grade
Reference Price

PC SABIC INNOVATIVE NANSHA ML7696-739
Flame retardant enhanced grade
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/ML7696-739 |
|---|---|---|---|
| elongation | Break | ASTM D638 | 2.0 % |
| Bending modulus | 50.0mmSpan | ASTM D790 | 6590 Mpa |
| bending strength | Yield,50.0mmSpan | ASTM D790 | 148 Mpa |
| tensile strength | Break | ASTM D638 | 95.0 Mpa |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/ML7696-739 |
| Water absorption rate | Equilibrium,23°C | ASTM D570 | 0.26 % |
| melt mass-flow rate | 300°C/5.0kg | ASTM D1238 | 19 g/10min |
| Specific volume | ASTM D792 | 0.690 cm³/g | |
| Shrinkage rate | MD:3.20mm | Internal Method | 0.10-0.30 % |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/ML7696-739 |
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 146 °C |
| thermal conductivity | ASTMC177 | 0.22 W/m/K | |
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTM D648 | 151 °C |
| Vicat softening temperature | ASTM D15255 | 165 °C | |
| RTI Elec | UL 746 | 120 °C | |
| RTI Imp | UL 746 | 120 °C | |
| RTI | UL 746 | 130 °C | |
| Linear coefficient of thermal expansion | MD:-40to95°C | ASTME831 | 2.2E-05 cm/cm/°C |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/ML7696-739 |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 3 |
| Hot wire ignition | HWI | UL 746 | PLC 0 |
| Volume resistivity | ASTM D257 | >1.0E+17 ohms·cm | |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 5 |
| Arc resistance | ASTM D495 | PLC7 | |
| High arc combustion index | HAI | UL 746 | PLC 4 |
| Dielectric strength | 3.20mm,inAir | ASTM D149 | 19 KV/mm |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/ML7696-739 |
| Suspended wall beam without notch impact strength | 23°C | ASTM D4812 | 1100 J/m |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/ML7696-739 |
| UL flame retardant rating | 2.99mm | UL 94 | V-0 |
| 1.47mm | UL 94 | V-1 |