plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 3300HR CELANESE USA
CELANEX® 
Automotive sector
Glass fiber reinforced,Hydrolysis stability leve
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodCELANESE USA/3300HR
Glass transition temperatureISO 11357-160 °C
Hot deformation temperature0.45MpaISO 75-1/-2225 °C
1.8MpaISO 75-1/-2205 °C
Linear coefficient of thermal expansionAcross FlowISO 11359-21 E-4/℃
Melting temperatureISO 11357-1225 °C
Vicat softening temperatureISO 306220 °C
mechanical propertiesTest ConditionTest MethodCELANESE USA/3300HR
Bending modulus23℃ISO 1789200 Mpa
bending strength23℃ISO 178210 Mpa
Charpy Notched Impact Strength23℃ISO 179/1eA8.5 KJ/m
-30℃ISO 179/1eA8.5 KJ/m
Elongation at Break5mm/minISO 527-2/1A2.7 %
Impact strength of cantilever beam gap23℃ISO 180/1A11.7 KJ/m
Impact strength of simply supported beam without notch23℃ISO 179/1eU46 KJ/m
-30℃ISO 179/1eU45 KJ/m
Suspended wall beam without notch impact strength23℃ISO 180/1U35 KJ/m
Tensile modulus1mm/minISO 527-2/1A9200 Mpa
tensile strength5mm/minISO 527-2/1A139 Mpa
Electrical performanceTest ConditionTest MethodCELANESE USA/3300HR
Compared to the Leakage Traceability Index (CTI)IEC 60112425
Dielectric dissipation factor100HzIEC 6025022 E-4
1MHzIEC 60250160 E-4
Dielectric strengthIEC 60243-131 KV/mm
Surface resistivityIEC 60093>1E15 Ohm
Volume resistivity1MHzIEC 602504.1
100HzIEC 602504.5
IE 60093>1E13 ohm.m
Physical propertiesTest ConditionTest MethodCELANESE USA/3300HR
densityISO 11831540 kg/m
Shrinkage rateAcross FlowISO 294-40.3-0.5 %