Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM KL003-BK8115 SABIC INNOVATIVE US
LNP™ LUBRICOMP™ 
Plastic bag
wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/KL003-BK8115
Hot deformation temperature0.45MPa,Unannealed,64.0mmSpanISO 75-2/Bf149 °C
1.8MPa,未退火,3.20mmASTM D64897.0 °C
1.8MPa,未退火,64.0mm跨距ISO 75-2/Af88.0 °C
0.45MPa,未退火,3.20mmASTM D648158 °C
Linear coefficient of thermal expansionTD：-30to30°CASTM D6961.1E-04 cm/cm/°C
MD：-30到30°CASTM D6961.1E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/KL003-BK8115
Bending modulusISO 1782250 Mpa
50.0mm跨距ASTM D7902210 Mpa
bending strengthASTM D79075.8 Mpa
elongation断裂ASTM D63819 %
屈服ASTM D63810 %
Friction coefficientDynamicASTM D3702Modified0.35
StaticASTM D3702Modified0.17
Tensile modulusASTM D6382530 Mpa
ISO 527-2/12460 Mpa
Tensile strain断裂ISO 527-2/516 %
屈服ISO 527-2/59.0 %
tensile strength断裂ISO 527-2/546.0 Mpa
屈服ASTM D63848.0 Mpa
屈服ISO 527-2/546.0 Mpa
断裂ASTM D63848.0 Mpa
Wear factorRingASTM D3702Modified0.300 10^-10in^5-min/ft-lb-hr
WasherASTM D3702Modified11.0 10^-10in^5-min/ft-lb-hr
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/KL003-BK8115
Shrinkage rateTD：24hrASTM D9551.0-3.0 %
MD：24小时ASTM D9551.0-3.0 %
Water absorption rate24hr,50%RHASTM D5700.20 %
平衡,23°C,50%RHISO 620.29 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE US/KL003-BK8115
Impact strength of cantilever beam gap23°CISO 180/1A3.0 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U46 kJ/m²

Contact Us

Get App

Top