Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PES RTP 1475 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 1475 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 690 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 64 J/m |
| hardness | Test Condition | Test Method | RTP US/RTP 1475 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 122 |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 1475 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | >1.0E+12 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 7E-03 |
| dielectric constant | 1MHz | ASTM D150 | 3.90 |
| dielectric strength | inOil | ASTM D149 | 15 kV/mm |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 1475 |
|---|---|---|---|
| tensile strength | ASTM D638 | 128 MPa | |
| elongation | 屈服 | ASTM D638 | 3.0to4.0 % |
| compressive strength | ASTM D695 | 131 MPa | |
| Tensile modulus | ASTM D638 | 5860 MPa | |
| Flexural modulus | ASTM D790 | 5520 MPa | |
| bending strength | ASTM D790 | 186 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP 1475 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP 1475 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.30 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.41 % |
| water content | 0.040 % | ||
| density | ASTM D792 | 1.47 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/RTP 1475 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 210 °C |
| thermal conductivity | ASTME1530 | 0.29 W/m/K | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 216 °C |
| Linear coefficient of thermal expansion | MD | ASTME831 | 3.6E-05 cm/cm/°C |
Contact Us
Get App
Top