Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Staramide PFB42ES EUROSTAR FRANCE
--
--
Filler, glass beads, fiberglass
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | EUROSTAR FRANCE/Staramide PFB42ES |
|---|---|---|---|
| Tensile modulus | 1mm/min，23°C | ISO 527-2 | 5700 MPa |
| bending strength | 2mm/min，23°C | ISO 178 | 145 MPa |
| Flexural modulus | 2mm/min，23°C | ISO 178 | 4700 MPa |
| elongation at break | 2mm/min，弯曲，23°C | ISO 527-2 | 4.4 % |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 5.00 kJ/m² |
| tensile strength | 5mm/min，23°C | ISO 527-2 | 93.0 MPa |
| bending strength | 2mm/min，屈服，23°C | ISO 178 | 145 MPa |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 20.0 kJ/m² |
| elongation at break | 5mm/min，23°C | ISO 527-2 | 2.6 % |
| physical property | Test Condition | Test Method | EUROSTAR FRANCE/Staramide PFB42ES |
|---|---|---|---|
| Water absorption rate | (23°C,24hr) | ISO 62 | 1.9 % |
| Shrinkage rate | MD4.00mm | ISO 294-4 | 0.44 % |
| density | ISO 1183 | 1.35 g/cm³ |
| Thermal performance | Test Condition | Test Method | EUROSTAR FRANCE/Staramide PFB42ES |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa退火，HDT | ISO 75-2/Af | 156 °C |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 9.3E-05 cm/cm／°C |
| MD | ISO 11359-2 | 4.9E-05 cm/cm／°C |
Contact Us
Get App
Top