Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Plaslube® J-1/30/TF/22 Techmer Polymer Modifiers
--
Pulley, cam, bearing, gear
Filler, glass fiber reinforced material, 30%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® J-1/30/TF/22 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 130 J/m |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® J-1/30/TF/22 |
|---|---|---|---|
| coefficient of friction | 与钢-静态6 | ASTM D1894 | 0.18 |
| bending strength | 断裂,23°C | ASTM D790 | 276 MPa |
| tensile strength | 断裂,23°C | ASTM D638 | 193 MPa |
| coefficient of friction | 与钢-动态 | ASTM D1894 | 0.23 |
| Flexural modulus | 23°C | ASTM D790 | 10000 MPa |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® J-1/30/TF/22 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.60 % |
| density | ASTM D792 | 1.49 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.20 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Plaslube® J-1/30/TF/22 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 254 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 260 °C |
Contact Us
Get App
Top