Plastic Datasheets
Try searching for materials
Log In | Sign Up
CategoriesCategories
Home
Plastic Materials
Plastic Additives
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC AD-5503 TEIJIN JAPAN
PANLITE®
Optical level
transparent、High mobility
SGS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Thermal PropertiesTest ConditionTest MethodTEIJIN JAPAN/AD-5503
Vicat Softening Temperature50℃/h 50NISO 308143 °C
Linear thermal expansion coefficientMDISO11359-27E-05 cm/cm/°C
Coefficient of Linear Thermal Expansion垂直方向ISO 11359-20.7 X10
平行方向0.7 X10
Vicat Softening TemperatureASTM D1525/ISO R306143 ℃（℉）
Heat Deflection Temperature0.45MPa,未退火ISO75-2/B138 °C
Deflection Temperature Under Load?1.80MPaISO 75-1 and ISO 75-2124 °C
0.45MPa138 °C
Heat Deflection Temperature1.8MPa,未退火ISO75-2/A124 °C
Linear thermal expansion coefficientTDISO11359-27E-05 cm/cm/°C
Vicat Softening TemperatureISO306/B50143 °C
Linear expansion coefficientASTM D696/ISO 113590.7 mm/mm.℃
Mechanical PropertiesTest ConditionTest MethodTEIJIN JAPAN/AD-5503
Flexural Strength2mm/minISO 17896 Mpa
ASTM D790/ISO 178/96 kg/cm²(MPa)[Lb/in²]
Tensile Stress(Yield)50mm/minISO 527-1 and ISO 527-263 Mpa
Izod Impact Strength带缺口ISO 1793 KJ/m
Tensile Elongation?(Yield)50mm/minISO 527-1 and ISO 527-26 %
Tensile StrengthASTM D638/ISO 527/63 kg/cm²(MPa)[Lb/in²]
Tensile Strain断裂ISO527-2/50>50 %
Izod Impact Strength没缺口ISO 179NB KJ/m
Tensile ModulusISO527-2/12450 Mpa
ASTM D638/ISO 527/2450 kg/cm²(MPa)[Lb/in²]
Tensile Elongation/6 %
Tensile Modulus1mm/minISO 527-1 and ISO 527-22450 Mpa
Flexural ModulusISO1782400 Mpa
Tensile Stress屈服ISO527-2/5063.0 Mpa
Tensile Strain6.0 %
Tensile Elongation (Break)50mm/minISO 527-1 and ISO 527-2>50 %
Flexural StressISO17896.0 Mpa
Flexural ModulusASTM D790/ISO 178/2400 kg/cm²(MPa)[Lb/in²]
2mm/minISO 1782400 Mpa
PhysicalTest ConditionTest MethodTEIJIN JAPAN/AD-5503
Transmittance试样厚度3mmASTM D100389 %
Modeling Shrinkage平行方向本公司制订的测定法0.5-0.7 %
垂直方向0.5-0.7 %
DensityISO 11831200 kg/m
Moisture Absorption放置在23℃水中24hISO 620.2 %
Index of RefractionASTM D5421.585
Melt Volume flow Rate300°C/1.2kgISO113354.0 cm3/10min
Modeling ShrinkageTD:4.00mm内部方法0.50to0.70 %
Melt Volume flow Rate300℃负荷1.2kgISO113354 CM
Modeling ShrinkageMD:4.00mm内部方法0.50to0.70 %
Moisture Absorption23°C,24hrISO620.20 %
OpticalTest ConditionTest MethodTEIJIN JAPAN/AD-5503
Index of RefractionASTMD5421.585
ASTM D542/ISO 4891.585
TransmittanceASTM D1003/ISO 1346889 %
3000µmASTMD100389.0 %
Physical PropertiesTest ConditionTest MethodTEIJIN JAPAN/AD-5503
Moisture Absorption 23℃/24HASTM D570/ISO 620.2 %
DensityASTM D792/ISO 1183/1200
Modeling ShrinkageASTM D9550.5-0.7 %
Impact PropertiesTest ConditionTest MethodTEIJIN JAPAN/AD-5503
Charpy Unnotched Impact StrengthISO179NoBreak
Electrical PropertiesTest ConditionTest MethodTEIJIN JAPAN/AD-5503
Volume ResistivityIEO 60250>1×10 Ω.cm
Dielectric Constant1MHz3
Dielectric StrengthIEC60243-130 KV/mm
Volume ResistivityIEC60093>1.0E+15 ohms·cm
Comparative Tracking IndexIEC60112250 V
Surface ResistivityIEO 60250>1×10 Ω
Arc Resistance短时间法IEO 60243-130 MV/m
Dissipation Factor?1MHzIEC602509E-03
Dissipation Factor?(Tangent)100HzIEO 6025010 X10
1MHz90 X10
Arc ResistanceIEO 60112250
Dielectric ConstantASTM D150/IEC 602503
Relative Permittivity1MHzIEC602503.00
Surface ResistivityIEC60093>1.0E+15 ohms
Dielectric Constant100HzIEO 602503.1
Relative PermittivityIEC602503.10
Dissipation Factor?1E-03

Contact Us

Get App

Top