plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA6 B30SF LANXESS BELGIUM

Durethan®

Automotive components,Instrumentation,Electronic and electrical enclosure,Industrial applications

Heat aging

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	LANXESS BELGIUM/B30SF
Hot deformation temperature	1.8 MPa，Unannealed	ISO 75-2/A	70 °C
Melting temperature		ISO 11357-3	222 °C

mechanical properties	Test Condition	Test Method	LANXESS BELGIUM/B30SF
Bending modulus	23℃23℃5	ISO 178-A	3200 Mpa
bending strength	23℃23°C 55	ISO 178-A	110 Mpa
bending strength		3.50% Strain，23℃3.5% Strain, 23°C	ISO 178-A	100 Mpa
Nominal tensile fracture strain	23℃23℃	ISO 527-2/50	9 %
Tensile modulus	23℃23℃	ISO 527-1-2	3600 Mpa
Tensile strain	Yield，23℃	ISO 527-2/50	3.7 %
tensile strength	Yield，23℃	ISO 527-2/50	70 Mpa

flame retardant performance	Test Condition	Test Method	LANXESS BELGIUM/B30SF
Glow wire combustion index (GWFI)	0.80 mm0.8 mm	IEC 60695-2-12	960 °C
		1.5 mm1.5 mm	IEC 60695-2-12	960 °C
		3.0 mm3.0 mm	IEC 60695-2-12	960 °C
Ignition temperature of heating wire	1.5 mm1.5 mm	IEC 60695-2-13	825 °C
		0.75 mm0.75 mm	IEC 60695-2-13	825 °C
		3 mm3.0 mm	IEC 60695-2-13	800 °C
UL flame retardant rating	1.50 mm	UL 94	V-0
		0.75 mm	UL 94	V-0
		3.00 mm	UL 94	5VA
		2.00 mm	UL 94	5VA
		0.40 mm	UL 94	V-0

Electrical performance	Test Condition	Test Method	LANXESS BELGIUM/B30SF
Compared to the anti leakage trace index	Solution A	IEC 60112	V

Physical properties	Test Condition	Test Method	LANXESS BELGIUM/B30SF
density	23°C	ISO 1183	1.35 g/cm³
Shrinkage rate	TD：260℃，2.0 mmAcross Flow : 500°F, 0,0787 in 33	ISO 2577	1.1 %
		TD：120℃，2.0 mm，4 hrsAcross Flow : 248°F, 4 hr, 0,0787 in 44	ISO 2577	0.4 %
		MD：120℃，2.0 mm，4 hrsFlow : 248°F, 4 hr, 0.0787 in 44	ISO 2577	0.4 %
		MD：260℃，2.0 mmFlow : 500°F, 0,0787 in 33	ISO 2577	1.1 %

impact performance	Test Condition	Test Method	LANXESS BELGIUM/B30SF
Charpy Notched Impact Strength	23℃23°C	ISO 179/1eA	< 10 kJ/m²
Charpy Notched Impact Strength		-30℃-30°C	ISO 179/1eA	< 10 kJ/m²
Impact strength of cantilever beam gap	-30℃-30°C	ISO 180-1A	< 10 kJ/m²
Impact strength of cantilever beam gap		23℃23°C	ISO 180-1A	< 10 kJ/m²
Impact strength of simply supported beam without notch	23℃23°C	ISO 179/1eU	150 kJ/m²
Impact strength of simply supported beam without notch		-30℃-30°C	ISO 179/1eU	130 kJ/m²
Suspended wall beam without notch impact strength	23℃23°C	ISO 180/1U	120 kJ/m²
Suspended wall beam without notch impact strength		-30℃-30°C	ISO 180/1U	100 kJ/m²

Contact Us

Get App

Top