Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP ED230HP BOREALIS EUROPE
Daplen™
Car bumper,Automotive External Parts,Car exterior decoration,Automotive sector,Automotive External Parts
High surface finish,filler,Mineral filler,20%,Filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodBOREALIS EUROPE/ED230HP
Charpy Notched Impact Strength23°CISO 179/1eA30 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eUNoBreak
Charpy Notched Impact Strength-30°CISO 179/1eA3.0 kJ/m²
Impact strength of cantilever beam gap-20°CISO 180/1A4.0 kJ/m²
Charpy Notched Impact Strength-20°CISO 179/1eA4.0 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A34 kJ/m²
Impact strength of simply supported beam without notch-20°CISO 179/1eU96 kJ/m²
hardnessTest ConditionTest MethodBOREALIS EUROPE/ED230HP
ball-indentation hardnessH132/10ISO 2039-143.0 Mpa
Mechanical propertiesTest ConditionTest MethodBOREALIS EUROPE/ED230HP
Tensile modulusISO 527-2/11800 Mpa
tensile strength 屈服ISO 527-2/5019.5 Mpa
bending strengthISO 17828.0 Mpa
Flexural modulusISO 1781900 Mpa
Tensile strain断裂ISO 527-2/50100 %
屈服ISO 527-2/504.5 %
physical property Test ConditionTest MethodBOREALIS EUROPE/ED230HP
Shrinkage rate--2内部方法0.80 %
densityISO 11831.05 g/cm³
Shrinkage rate90°C,2小时内部方法0.10 %
melt mass-flow rate230°C/2.16kgISO 113310 g/10min
Thermal performanceTest ConditionTest MethodBOREALIS EUROPE/ED230HP
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B105 °C
vicat--ISO 306/A50140 °C
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A56.0 °C
vicat--ISO 306/B5049.0 °C
Linear coefficient of thermal expansionMD：-30到80°C内部方法5.2E-05 cm/cm/°C

Contact Us

Get App

Top