Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PET MB2015 MITSUBISHI ENGINEERING JAPAN
IUPILON™
Automotive components
Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB2015 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 59 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 96 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | ASTM D790/ISO 178 | 2500 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 2400 kg/cm²(MPa)[Lb/in²] | |
| elongation at break | ASTM D638/ISO 527 | 98 % |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB2015 |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.6-0.8 % | |
| density | ASTM D792/ISO 1183 | 1.22 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 7.9 g/10min | |
| Water absorption rate | ASTM D570/ISO 62 | 0.2 % |
| Thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/MB2015 |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 136 ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 6.0E-05 mm/mm.℃ |
Contact Us
Get App
Top