Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 266 Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/266 |
|---|---|---|---|
| melt mass-flow rate | 230℃,3.8kg | ASTM D-1238 | 5.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/266 |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 37.2 MPa |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 176 J/m |
| elongation | 断裂 | ASTM D-638 | 48 % |
| elongation at yield | ASTM D-638 | 4.0 % | |
| Rockwell hardness | ASTM D-785 | 108 R scale | |
| Tensile modulus | ASTM D-638 | 1970 MPa | |
| bending strength | 屈服 | ASTM D-790 | 58.6 MPa |
| Flexural modulus | ASTM D-790 | 1770 MPa | |
| tensile strength | 断裂 | ASTM D-638 | 29.0 MPa |
| physical property | Test Condition | Test Method | Ineos ABS/266 |
|---|---|---|---|
| density | ASTM D-792 | 1.08 g/cm3 | |
| Shrinkage rate | ASTM D-955 | 0.40-0.60 % |
| Thermal performance | Test Condition | Test Method | Ineos ABS/266 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa，未退火，3.18mm，HDT | ASTM D-648 | 86.7 ℃ |
| 1.80MPa，未退火，12.7mm，HDT | ASTM D-648 | 82.2 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.00012 cm/cm℃ | |
| Heat distortion temperature | 0.45MPa，未退火，12.7mm，HDT | ASTM D-648 | 93.9 ℃ |
| combustibility | 1.50mm | HB UL 94 | |
| Heat distortion temperature | 1.80MPa，未退火，3.18mm，HDT | ASTM D-648 | 72.8 ℃ |
Contact Us
Get App
Top