Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE PRE-ELEC® PE 1202 Premix Oy
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodPremix Oy/PRE-ELEC® PE 1202
Charpy Notched Impact Strength-20°CASTM D25623 kJ/m²
Impact strength of cantilever beam gap23°CISO 18043 kJ/m²
Charpy Notched Impact Strength23°CASTM D25636 kJ/m²
Impact strength of cantilever beam gap-20°CISO 18018 kJ/m²
Suspended wall beam without notch impact strength-20°C,4.00mmASTM D256NoBreak
Impact strength of simply supported beam without notch23°CASTM D256NoBreak
-20°CASTM D256NoBreak
-20°CISO 179NoBreak
Charpy Notched Impact Strength23°CISO 17936 kJ/m²
Suspended wall beam without notch impact strength-20°CISO 180NoBreak
Impact strength of cantilever beam gap-20°C,4.00mm，AreaASTM D25616.8 kJ/m²
23°C,4.00mm，AreaASTM D25644.1 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179NoBreak
Suspended wall beam without notch impact strength23°CISO 180NoBreak
Charpy Notched Impact Strength-20°CISO 17924 kJ/m²
Suspended wall beam without notch impact strength23°C,4.00mmASTM D256NoBreak
hardnessTest ConditionTest MethodPremix Oy/PRE-ELEC® PE 1202
Shore hardness邵氏DISO 86866
邵氏AISO 86895
Electrical performanceTest ConditionTest MethodPremix Oy/PRE-ELEC® PE 1202
Surface ResistivityIEC 61340-2-3<1.0E+5 ohms
Volume resistivity内部方法<1.0E+4 ohms·cm
Mechanical propertiesTest ConditionTest MethodPremix Oy/PRE-ELEC® PE 1202
tensile strength ASTM D63813.1 MPa
Tensile strain断裂,4.00mmISO 527-230 %
屈服ISO 527-210 %
Flexural modulus4.00mmASTM D7901200 MPa
4.00mmISO 1781200 MPa
tensile strength 屈服ASTM D63826.9 MPa
屈服ISO 527-231.0 MPa
4.00mmISO 527-213.0 MPa
physical property Test ConditionTest MethodPremix Oy/PRE-ELEC® PE 1202
Shrinkage rateMDASTM D9551.5to2.5 %
MDISO 294-41.5to2.5 %
densityASTM D7921.08 g/cm³
ISO 11831.09 g/cm³
melt mass-flow rate190°C/21.6kgISO 11332.0 g/10min
Thermal performanceTest ConditionTest MethodPremix Oy/PRE-ELEC® PE 1202
Heat distortion temperature1.8MPa,未退火，HDTASTM D648A87.2 °C
1.8MPa,未退火，HDTISO 75-2/Af87.0 °C
0.45MPa,未退火，HDTASTM D648B83.9 °C
vicat--ISO 306/A50128 °C
--ASTM D15253128 °C
--ASTM D1525481.1 °C
--ISO 306/B5081.0 °C
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/Bf84.0 °C

Contact Us

Get App

Top