Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 633 Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/633 |
|---|---|---|---|
| melt mass-flow rate | 230℃,10kg | ASTM D-1238 | 15 g/10min |
| 230℃,3.8kg | ASTM D-1238 | 4.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/633 |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 41.3 MPa |
| Rockwell hardness | ASTM D-785 | 109 R scale | |
| Tensile modulus | ASTM D-638 | 2200 MPa | |
| bending strength | 屈服 | ASTM D-790 | 65.5 MPa |
| Impact strength of cantilever beam gap | 23℃,3.20mm | ASTM D-256 | 347 J/m |
| Flexural modulus | ASTM D-790 | 2200 MPa | |
| Impact strength of cantilever beam gap | -40℃,3.20mm | ASTM D-256 | 64.1 J/m |
| optical performance | Test Condition | Test Method | Ineos ABS/633 |
|---|---|---|---|
| gloss | 60℃ | ASTM D-253 | 90 |
| physical property | Test Condition | Test Method | Ineos ABS/633 |
|---|---|---|---|
| density | ASTM D-792 | 1.05 g/cm3 | |
| Shrinkage rate | ASTM D-955 | 0.40-0.60 % |
| Thermal performance | Test Condition | Test Method | Ineos ABS/633 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa，未退火，12.7mm，HDT | ASTM D-648 | 85.0 ℃ |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000090 cm/cm℃ | |
| Heat distortion temperature | 0.45MPa，退火，12.7mm，HDT | ASTM D-648 | 102 ℃ |
| 1.80MPa，退火，12.7mm，HDT | ASTM D-648 | 97.0 ℃ | |
| vicat | ASTM D-1525 | 106 ℃ | |
| combustibility | 3.0mm | UL 94 | HB |
| Heat distortion temperature | 0.45MPa，未退火，12.7mm，HDT | ASTM D-648 | 96.0 ℃ |
| combustibility | 1.50mm | UL 94 | HB |
Contact Us
Get App
Top