plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC GSH2030R2 MITSUBISHI ENGINEERING JAPAN
IUPILON™ 
Automotive Applications,electrical equipment
Glass fiber reinforced,Filler: Glass fiber reinf,30% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2030R2
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B148 °C
1.8MPa,UnannealedISO 75-2/A144 °C
Linear coefficient of thermal expansionTDISO 11359-26.3E-05 cm/cm/°C
MDISO 11359-21.8E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2030R2
Bending modulusISO 1788500 Mpa
bending strengthISO 178180 Mpa
Tensile modulusISO 527-28900 Mpa
Tensile strainBreakISO 527-22.5 %
tensile strengthBreakISO 527-2120 Mpa
Electrical performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2030R2
Compared to the anti leakage trace indexCTIUL 746PLC 4
Dielectric strength1.00mmIEC 60243-132 KV/mm
3.00mmIEC 60243-120 KV/mm
Dissipation factor1MHzIEC 602508.4E-03
100HzIEC 602501.1E-03
Relative permittivity100HzIEC 602503.60
1MHzIEC 602503.50
Surface resistivityIEC 600932E+15 ohms
Volume resistivityIEC 600932E+16 ohms·cm
Physical propertiesTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2030R2
melt mass-flow rate300°C/1.2kgISO 11335.7 g/10min
Melt Volume Flow Rate (MVR)300°C/1.2kgISO 11334.80 cm3/10min
Shrinkage rate吸水率(Saturation,23°C)0.090 %
MD:3.20mm0.050-0.25 %
TD:3.20mm0.25-0.45 %
impact performanceTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2030R2
Impact strength of simply supported beam without notch23°CISO 17950 kJ/m²
flammabilityTest ConditionTest MethodMITSUBISHI ENGINEERING JAPAN/GSH2030R2
UL flame retardant rating0.40mmUL 94HB

Contact Us

Get App

Top