Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

POM GH-25 CF3500 JAPAN POLYPLASTIC

DURACON®

household electrical appliances,Automotive Applications

High temperature resistan,wear resistant,Filler: Glass fiber reinf,25% filler by weight

Plastic Datasheets

hardness	Test Condition	Test Method	JAPAN POLYPLASTIC/GH-25 CF3500
Rockwell hardness	M-Scale	ISO 2039-2	95

Supplementary Information	Test Condition	Test Method	JAPAN POLYPLASTIC/GH-25 CF3500
ColourNumber			CF3500/CD3501

thermal performance	Test Condition	Test Method	JAPAN POLYPLASTIC/GH-25 CF3500
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	162 °C
Linear coefficient of thermal expansion	MD：23to55°C	Internal Method	3E-05 cm/cm/°C
Linear coefficient of thermal expansion		TD：23to55°C	Internal Method	9E-05 cm/cm/°C

mechanical properties	Test Condition	Test Method	JAPAN POLYPLASTIC/GH-25 CF3500
Bending modulus		ISO 178	7900 Mpa
bending strength		ISO 178	196 Mpa
Friction coefficient	Dynamic2	JISK7218	0.37
Friction coefficient		Steel - Dynamic3	JISK7218	0.60
Tensile modulus		ISO 527-2	8500 Mpa
Tensile strain	Break	ISO 527-2	2.4 %
tensile strength		ISO 527-2	136 Mpa
Wear factor	0.060MPa,0.15m/sec4	JISK7218	300 10^-8mm³/N·m
		0.49MPa,0.30m/sec5	JISK7218	400 10^-8mm³/N·m
		0.060MPa,0.15m/sec7	JISK7218	10000 10^-8mm³/N·m
		0.49MPa,0.30m/sec6	JISK7218	7000 10^-8mm³/N·m

Electrical performance	Test Condition	Test Method	JAPAN POLYPLASTIC/GH-25 CF3500
Dielectric strength	3.00mm	IEC 60243-1	24 KV/mm
Surface resistivity		IEC 60093	4E+16 ohms
Volume resistivity		IEC 60093	5E+13 ohms·cm

Physical properties	Test Condition	Test Method	JAPAN POLYPLASTIC/GH-25 CF3500
melt mass-flow rate	190°C/2.16kg	ISO 1133	12 g/10min
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	9.00 cm3/10min
Water absorption rate	23°C,24hr	ISO 62	0.60 %

flammability	Test Condition	Test Method	JAPAN POLYPLASTIC/GH-25 CF3500
UL flame retardant rating		UL 94	HB

Get App

Top