Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA+SAN TES J-71/30/VO/ND Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/TES J-71/30/VO/ND |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C,3.18mm | ASTM D256 | 270 J/m |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 64 J/m |
| hardness | Test Condition | Test Method | Techmer Polymer Modifiers/TES J-71/30/VO/ND |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 91 |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/TES J-71/30/VO/ND |
|---|---|---|---|
| bending strength | 断裂,23°C | ASTM D790 | 185 MPa |
| tensile strength | 断裂,23°C | ASTM D638 | 117 MPa |
| Tensile modulus | 23°C | ASTM D638 | 12300 MPa |
| Flexural modulus | 23°C | ASTM D790 | 10500 MPa |
| elongation | 断裂,23°C | ASTM D638 | 1.5 % |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/TES J-71/30/VO/ND |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/TES J-71/30/VO/ND |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.33 % |
| density | ASTM D792 | 1.55 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.12 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/TES J-71/30/VO/ND |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 193 °C |
Contact Us
Get App
Top