Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6 6 GB 30 A SCHULMAN USA
SCHULAMID®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | A SCHULMAN USA/6 GB 30 |
|---|---|---|---|
| Ball Pressure Test | H358/30 | ISO 2039-1 | 165 Mpa |
| thermal performance | Test Condition | Test Method | A SCHULMAN USA/6 GB 30 |
|---|---|---|---|
| Ball Pressure Test | 105°C | IEC 60695-10-2 | Pass |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/Af | 68.0 °C |
| 0.45MPa,Unannealed | ISO 75-2/Bf | 180 °C | |
| Vicat softening temperature | -- | ISO 306/B50 | 200 °C |
| -- | ISO 306/A50 | 215 °C |
| mechanical properties | Test Condition | Test Method | A SCHULMAN USA/6 GB 30 |
|---|---|---|---|
| Bending modulus | ISO 178 | 3000 Mpa | |
| Bending strain | ISO 178 | 6.5 % | |
| bending strength | ISO 178 | 100 Mpa | |
| Tensile modulus | ISO 527-2/1A/1 | 4000 Mpa | |
| Tensile strain | Break | ISO 527-2/1A/5 | 10 % |
| tensile strength | Break | ISO 527-2/1A/5 | 70.0 Mpa |
| Electrical performance | Test Condition | Test Method | A SCHULMAN USA/6 GB 30 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 1 | |
| Surface resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+13 ohms·cm |
| Physical properties | Test Condition | Test Method | A SCHULMAN USA/6 GB 30 |
|---|---|---|---|
| Stickiness | ISO 307 | 145 cm³/g | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 2.2 % |
| impact performance | Test Condition | Test Method | A SCHULMAN USA/6 GB 30 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 28 kJ/m² |
| 23°C | ISO 179/1eU | 35 kJ/m² |
| flammability | Test Condition | Test Method | A SCHULMAN USA/6 GB 30 |
|---|---|---|---|
| Burning rate | ISO 3795 | <100 mm/min | |
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | -- °C |
| 1.5mm | IEC 60695-2-12 | -- °C | |
| UL flame retardant rating | 3.0mm | IEC 60695-11-10,-20 | HB |
| 1.5mm | IEC 60695-11-10,-20 | HB |