Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP 7705-00900 SABIC INNOVATIVE SHANGHAI
SABIC®
Automotive sector
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/7705-00900 |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 120 J/m |
-30°C | ISO 180/1A | 3.0 kJ/m² | |
Dart impact | -30°C,EnergyatPeakLoad | ASTM D3763 | 7.10 J |
Suspended wall beam without notch impact strength | 23°C,3.20mm | ASTM D4812 | NoBreak |
Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 20 kJ/m² |
0°C | ISO 180/1A | 6.0 kJ/m² | |
Dart impact | 0°C,EnergyatPeakLoad | ASTM D3763 | 19.1 J |
23°C,EnergyatPeakLoad | ASTM D3763 | 22.1 J |
hardness | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/7705-00900 |
---|---|---|---|
Shore hardness | 邵氏D | ISO 868 | 60 |
Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/7705-00900 |
---|---|---|---|
Tensile modulus | ISO 527-2/1 | 2010 Mpa | |
tensile strength | 屈服 | ISO 527-2/50 | 22.0 Mpa |
Tensile modulus | ASTM D638 | 1910 Mpa | |
elongation | 断裂 | ASTM D638 | 24 % |
屈服 | ASTM D638 | 4.6 % | |
Flexural modulus | 50.0mm跨距4 | ISO 178 | 2080 Mpa |
50.0mm跨距5 | ASTM D790 | 1900 Mpa | |
tensile strength | 断裂 | ASTM D638 | 16.0 Mpa |
屈服 | ASTM D638 | 23.0 Mpa | |
Tensile strain | 断裂 | ISO 527-2/50 | 32 % |
tensile strength | 断裂 | ISO 527-2/1A/50 | 17.0 Mpa |
Tensile strain | 屈服 | ISO 527-2/50 | 4.4 % |
physical property | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/7705-00900 |
---|---|---|---|
melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 22 g/10min |
Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE SHANGHAI/7705-00900 |
---|---|---|---|
vicat | ISO 306/A50 | 130 °C | |
Heat distortion temperature | 0.45MPa,Unannealed,HDT | ISO 75-2/B | 105 °C |
0.45MPa,未退火,3.20mm,HDT | ASTM D648 | 112 °C | |
Linear coefficient of thermal expansion | MD:-30到100°C | ISO 11359-2 | 5.9E-05 cm/cm/°C |
Heat distortion temperature | 1.8MPa,Unannealed,HDT | ISO 75-2/A | 59.0 °C |
Linear coefficient of thermal expansion | TD:-30to100°C | ISO 11359-2 | 1.5E-04 cm/cm/°C |
Heat distortion temperature | 1.8MPa,未退火,3.20mm,HDT | ASTM D648 | 57.0 °C |
Contact Us
Get App
Top