Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT P7408 TYNE USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTYNE USA/P7408
Impact strength of cantilever beam gap3.18mmASTM D25669 J/m
Suspended wall beam without notch impact strength3.18mmASTM D256430 J/m
Electrical performanceTest ConditionTest MethodTYNE USA/P7408
dielectric strength1.57mm,inAirASTM D14930 kV/mm
Volume resistivityASTM D2576E+16 ohms·cm
Dissipation Factor1MHzASTM D1500.020
dielectric constant1 MHzASTM D1504.00
dielectric strength1.57mm,in AirASTM D14930 kV/mm
dielectric constant1MHzASTM D1504.00
Volume resistivityASTM D2576E+16 ohm.cm
Dissipation Factor1 MHzASTM D1500.020
Mechanical propertiesTest ConditionTest MethodTYNE USA/P7408
Impact strength of cantilever beam gap3.18mmASTM D25669 J/m
elongation at yieldASTM D6382.0 %
Suspended wall beam without notch impact strength3.18mmASTM D256430 J/m
elongation屈服ASTM D6382.0 %
tensile strength 断裂ASTM D63875.8 MPa
Flexural modulusASTM D7907580 MPa
bending strengthASTM D790117 MPa
Fracture tensile strength断裂ASTM D63875.8 MPa
physical property Test ConditionTest MethodTYNE USA/P7408
Shrinkage rateMDASTM D9550.50to0.70 %
ASTM D9550.50-0.70 %
Water absorption rate24hrASTM D5700.20 %
densityASTM D7921.10 g/cm3
ASTM D7921.10 g/cm³
Thermal performanceTest ConditionTest MethodTYNE USA/P7408
Heat distortion temperature1.8MPa,未退火，HDTASTM D648210 °C
0.45MPa,未退火，HDTASTM D648193 °C
1.8MPa,未退火，HDTASTM D648210 ℃
0.45MPa,未退火，HDTASTM D648193 ℃

Contact Us

Get App

Top