Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC PC 740/4.5 FR UV CC1320-08LG ALBIS PLASTIC GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC 740/4.5 FR UV CC1320-08LG |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -40°C | ISO 179/1eU | 无断裂 |
| -20°C | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | -20°C | ISO 179/1eA | 11 kJ/m² |
| -- | ISO 179/1eA | 10 kJ/m² | |
| -40°C | ISO 179/1eA | 10 kJ/m² | |
| Impact strength of simply supported beam without notch | -- | ISO 179/1eU | 无断裂 |
| Supplementary Information | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC 740/4.5 FR UV CC1320-08LG |
|---|---|---|---|
| half-power angle | 1.00mm，T | 3.00 ° |
| Mechanical properties | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC 740/4.5 FR UV CC1320-08LG |
|---|---|---|---|
| tensile strength | -- | ISO 527-2 | 64.0 MPa |
| Tensile modulus | ISO 527-2 | 2500 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | 85 % |
| bending strength | 3.5%应变 | ISO 178 | 74.0 MPa |
| Tensile strain | 屈服 | ISO 527-2 | 6.0 % |
| tensile strength | 屈服 | ISO 527-2 | 64.0 MPa |
| bending strength | -- | ISO 178 | 97.0 MPa |
| Flexural modulus | ISO 178 | 2400 MPa |
| optical performance | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC 740/4.5 FR UV CC1320-08LG |
|---|---|---|---|
| Haze ratio | 1000µm | ISO 13468 | 82 % |
| transmissivity | 总计,1000µm | ISO 13468 | 87.0 % |
| flammability | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC 740/4.5 FR UV CC1320-08LG |
|---|---|---|---|
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 850960 °C |
| 1.0mm | IEC 60695-2-12 | 850 °C | |
| UL flame retardant rating | 1.5mm | UL 94 | V-2 |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 850 °C |
| 4.0mm | IEC 60695-2-12 | 850960 °C |
| physical property | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC 740/4.5 FR UV CC1320-08LG |
|---|---|---|---|
| Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 20.0 cm³/10min |
| density | ISO 1183 | 1.19 g/cm³ |
| Thermal performance | Test Condition | Test Method | ALBIS PLASTIC GmbH/ PC 740/4.5 FR UV CC1320-08LG |
|---|---|---|---|
| vicat | ISO 306/B50 | 143 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 128 °C |
Contact Us
Get App
Top