Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 209AW JAPAN POLYPLASTIC
DURANEX®
Fitness equipment,Casters
Low friction coefficient,wear resistant,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| Rockwell hardness | M级 | ISO 2039-2 | 75 |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| ColorNumber | EF2001 |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 4E+16 ohms·cm | |
| dielectric strength | 3.00mm | IEC 60243-1 | 18 KV/mm |
| Volume resistivity | ASTM D257/IEC 60093 | - Ω.cm |
| Mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 82 kg/cm²(MPa)[Lb/in²] | |
| Charpy Notched Impact Strength | ISO 179/1eA | 3.5 kJ/m² | |
| Flexural modulus | ASTM D790/ISO 178 | 2780 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ISO 527-1/-2 | 52 Mpa | |
| bending strength | ISO 178 | 82 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 5.0 % |
| Flexural modulus | ISO 178 | 2780 Mpa | |
| elongation at break | ASTM D638/ISO 527 | 5 % | |
| tensile strength | ASTM D638/ISO 527 | 52 kg/cm²(MPa)[Lb/in²] | |
| ISO 527-2 | 52.0 Mpa |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.45 |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| Thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/209AW |
|---|---|---|---|
| Combustibility (rate) | UL 94 | V-0 | |
| Linear coefficient of thermal expansion | TD：23to55°C | 内部方法 | 1E-04 cm/cm/°C |
| MD：23到55°C | 内部方法 | 1E-04 cm/cm/°C | |
| Heat distortion temperature | 1.8Mpa，HDT | ISO 75-1/-2 | 73 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 73.0 °C | |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | - mm/mm.℃ | |
| UL flame retardant rating | UL 94 | V-0 |
Contact Us
Get App
Top