Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Polyester Plenco 01530 (Transfer) Plastics Engineering Co.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodPlastics Engineering Co./Plenco 01530 (Transfer)
Charpy Notched Impact StrengthASTM D25637.7 J/m
Impact strength of cantilever beam gapASTM D25641 J/m
hardnessTest ConditionTest MethodPlastics Engineering Co./Plenco 01530 (Transfer)
Rockwell hardnessE计秤ASTM D78576
Mechanical propertiesTest ConditionTest MethodPlastics Engineering Co./Plenco 01530 (Transfer)
elongation断裂ASTM D6380.60 %
tensile strength ASTM D63883.0 MPa
compressive strengthASTM D695202 MPa
Tensile modulusASTM D63818200 MPa
Flexural modulusASTM D79018300 MPa
bending strengthASTM D790140 MPa
Electrical performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 01530 (Transfer)
dielectric strength--3ASTM D14915 kV/mm
Volume resistivityASTM D2573.1E+15 ohms·cm
Dissipation Factor1MHzASTM D1500.014
dielectric constant1MHzASTM D1504.50
dielectric strength--4ASTM D14912 kV/mm
Compared to the Leakage Tracking Index (CTI)CTIUL 746PLC 0
arc resistanceASTM D495191 sec
flammabilityTest ConditionTest MethodPlastics Engineering Co./Plenco 01530 (Transfer)
UL flame retardant rating1.5mmUL 94HB
Limiting Oxygen IndexASTM D286326 %
physical property Test ConditionTest MethodPlastics Engineering Co./Plenco 01530 (Transfer)
Shrinkage rateMDASTM D9550.12 %
Water absorption rate24hrASTM D5700.14 %
Apparent densityASTM D18950.88 g/cm³
densityASTM D7921.99 g/cm³
Thermal performanceTest ConditionTest MethodPlastics Engineering Co./Plenco 01530 (Transfer)
Heat distortion temperature1.8MPa,未退火，HDTASTM D648264 °C
Continuous use temperatureASTM D794223 °C
Linear coefficient of thermal expansionMDASTME8315.4E-05 cm/cm/°C

Contact Us

Get App

Top