plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 1010C2 DSM TAIWAN
Novamid®
Electrical field,Electronic field
Oil resistant,wear resistant,High toughness
RoHS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodDSM TAIWAN/1010C2
Hot deformation temperature0.45 MPa, UnannealedISO 75-2/B180 °C
1.8 MPa, UnannealedISO 75-2/A59.0 °C
Linear coefficient of thermal expansionAcross FlowISO 11359-28.0E-5 cm/cm/°C
FlowISO 11359-27.0E-5 cm/cm/°C
Melting temperatureISO 11357-3220 °C
mechanical propertiesTest ConditionTest MethodDSM TAIWAN/1010C2
Bending modulusISO 1782800 Mpa
bending strengthISO 178102 Mpa
Nominal tensile fracture strainISO 527-218 %
Tensile modulusISO 527-23400 Mpa
Tensile strainYieldISO 527-24.2 %
tensile strengthYieldISO 527-287.0 Mpa
Electrical performanceTest ConditionTest MethodDSM TAIWAN/1010C2
Compared to the anti leakage trace indexIEC 60112PLC 0
Dielectric strengthIEC 60243-127 KV/mm
Dissipation factor100 HzIEC 602500.011
1 MHzIEC 602500.023
Relative permittivity100 HzIEC 602504.00
1 MHzIEC 602504.00
Surface resistivityIEC 60093-- ohms
Volume resistivityIEC 60093> 1.0E+15 ohms·cm
Physical propertiesTest ConditionTest MethodDSM TAIWAN/1010C2
densityISO 11831.13 g/cm³
Shrinkage rate横向FlowISO 294-41.3 %
FlowISO 294-41.2 %
StickinessISO 307118 cm³/g
Water absorption rateEquilibrium, 23°C, 50% RHISO 622.8 %
impact performanceTest ConditionTest MethodDSM TAIWAN/1010C2
Charpy Notched Impact Strength23°CISO 1794.2 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179无断裂
flammabilityTest ConditionTest MethodDSM TAIWAN/1010C2
Flammability levelUL 94V-2