Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B3 GF 25 natural (2471) AKRO-PLASTIC GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 12 kJ/m² |
| -30°C | ISO 179/1eA | 10 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 85 kJ/m² |
| -30°C | ISO 179/1eU | 80 kJ/m² |
| Supplementary Information | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| ReinforcementContent | ISO 1172 | 25 % |
| hardness | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| ball-indentation hardness | H961/30 | ISO 2039-1 | 215 MPa |
| Electrical performance | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+13 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+12 ohms | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2/5 | 160 MPa |
| Tensile strain | 断裂 | ISO 527-2/5 | 3.5 % |
| Flexural modulus | ISO 178 | 7000 MPa | |
| Tensile modulus | ISO 527-2/1 | 8500 MPa | |
| bending strength | ISO 178 | 245 MPa |
| flammability | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| burning rate | 1.00mm | FMVSS302 | <100 mm/min |
| Burning wire flammability index | 1.6mm | IEC 60695-2-12 | 650 °C |
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| spiral flow length | 内部方法 | 72.0 cm | |
| density | 23°C | ISO 1183 | 1.31 g/cm³ |
| Shrinkage rate | TD | ISO 294-4 | 0.80 % |
| MD | ISO 294-4 | 0.20 % | |
| Water absorption rate | 饱和,23°C | ISO 62 | 6.8to7.4 % |
| 70°C | ISO 1110 | 2.2to2.5 % |
| Thermal performance | Test Condition | Test Method | AKRO-PLASTIC GmbH/ B3 GF 25 natural (2471) |
|---|---|---|---|
| TemperatureIndex | 50%LossofTensileStrength,20000hr | IEC 216 | 130to150 °C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 220 °C |
| melting temperature | DIN EN11357-1 | 220 °C | |
| TemperatureIndex | 50%LossofTensileStrength,5000hr | IEC 216 | 160to175 °C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 210 °C |
Contact Us
Get App
Top