Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ASA+ABS Prime ABS ST80 Primex Plastics Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS ST80 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 500 J/m |
| hardness | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS ST80 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 53 |
| Electrical performance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS ST80 |
|---|---|---|---|
| Surface Resistivity | 1E+14 ohms |
| Mechanical properties | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS ST80 |
|---|---|---|---|
| elongation | 断裂,3.18mm | ASTM D638 | 10 % |
| Flexural modulus | 3.18mm,50.8mm跨距 | ASTM D790 | 814 MPa |
| tensile strength | 断裂,3.18mm | ASTM D638 | 24.8 MPa |
| elongation | 屈服,3.18mm | ASTM D638 | 7.0 % |
| optical performance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS ST80 |
|---|---|---|---|
| gloss | 60° | ASTM D523 | 3 |
| physical property | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS ST80 |
|---|---|---|---|
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 3.0 g/10min |
| density | ASTM D792 | 1.04 g/cm³ |
| Thermal performance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS ST80 |
|---|---|---|---|
| vicat | ASTM D1525 | 105 °C | |
| Heat distortion temperature | 0.45MPa,未退火,3.18mm，HDT | ASTM D648 | 93.3 °C |
| 1.8MPa,未退火,3.18mm，HDT | ASTM D648 | 81.1 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 9.5E-05 cm/cm/°C |
Contact Us
Get App
Top