PA66 R513H PA66 vs. - Plastic Material Properties Comparison Chart at Plas.com

Material Selector

All

Plastic Materials Additives Masterbatch Material Selector Price Index Trade Data Plastic News About Us

Material Comparison

Add Comparison Model

Select Products for Comparison (1/4)

Highlight Differences

Hide Same

Product Name / Manufacturer / Model

Grade

Certificates

Reference Price

PA66 ASCEND USA R513H

Injection grade

US$ 4,290 / MT

FOB Dongguan Port

thermal performance	Test Condition	Test Method	ASCEND USA/R513H
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	258 °C
RTI Elec	3.0 mm	UL 746	140 °C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	240 °C
RTI Imp	3.0 mm	UL 746	120 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	1.1E-4 cm/cm/°C
RTI	3.0 mm	UL 746	140 °C
Linear coefficient of thermal expansion	Flow : 23 to 55°C, 2.00 mm	ISO 11359-2	3.0E-5 cm/cm/°C
RTI Elec	0.75 mm	UL 746	140 °C
RTI Imp	1.5 mm	UL 746	120 °C
RTI	1.5 mm	UL 746	140 °C
RTI Elec	1.5 mm	UL 746	140 °C
Melting temperature		ISO 11357-3	260 °C
RTI Imp	0.75 mm	UL 746	120 °C
RTI	0.75 mm	UL 746	125 °C
Electrical performance	Test Condition	Test Method	ASCEND USA/R513H
Hot wire ignition	1.5 mm	UL 746	PLC 3
High arc combustion index	0.75 mm	UL 746	PLC 0
Hot wire ignition	3.0 mm	UL 746	PLC 4
Dielectric strength	1.00 mm	IEC 60243	20 KV/mm
High voltage arc tracing rate		UL 746	PLC 1
High arc combustion index	1.5 mm	UL 746	PLC 0
Arc resistance	3.00 mm	ASTM D495	PLC 6
Volume resistivity	0.750 mm	IEC 60093	1.0E+13 ohms·cm
Hot wire ignition	0.75 mm	UL 746	PLC 4
High arc combustion index	3.0 mm	UL 746	PLC 0
Physical properties	Test Condition	Test Method	ASCEND USA/R513H
density		ISO 1183	1.23 g/cm³
Shrinkage rate	横向Flow : 23°C, 2.00 mm	ISO 294-4	1.0 %
Shrinkage rate		Flow : 23°C, 2.00 mm	ISO 294-4	0.50 %
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.2 %
Water absorption rate		24 hr, 23°C	ISO 62	1.0 %
injection	Test Condition	Test Method	ASCEND USA/R513H
Temperature at the front of the material cylinder			280 to 310 °C
Mold temperature			65 to 95 °C
Processing (melt) temperature			285 to 305 °C
Suggested maximum material return ratio			25 %
Spray nozzle temperature			280 to 310 °C
drying temperature			80 °C
Temperature in the middle of the barrel			280 to 310 °C
drying time			4.0 hr
Temperature at the rear of the barrel			280 to 310 °C
flammability	Test Condition	Test Method	ASCEND USA/R513H
Extreme Oxygen Index		ISO 4589-2	25 %
Burning wire flammability index	0.75 mm	IEC 60695-2-12	675 °C
Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	700 °C
		0.75 mm	IEC 60695-2-13	700 °C
		1.5 mm	IEC 60695-2-13	700 °C
UL flame retardant rating	3.0 mm	UL 94	HB
Burning wire flammability index	3.0 mm	IEC 60695-2-12	675 °C
UL flame retardant rating	0.75 mm	UL 94	HB
UL flame retardant rating		1.5 mm	UL 94	HB
Burning wire flammability index	1.5 mm	IEC 60695-2-12	675 °C
mechanical properties	Test Condition	Test Method	ASCEND USA/R513H
bending strength	23°C	ISO 178	165 Mpa
tensile strength	Break, 23°C	ISO 527-2	115 Mpa
Tensile modulus	23°C	ISO 527-2	6200 Mpa
Poisson's ratio		ISO 527-2	0.40
Bending modulus	23°C	ISO 178	5200 Mpa
Tensile strain	Break, 23°C	ISO 527-2	3.0 %
impact performance	Test Condition	Test Method	ASCEND USA/R513H
Impact strength of cantilever beam gap	-30°C	ISO 180	5.0 kJ/m²
Charpy Notched Impact Strength	-30°C	ISO 179	6.0 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179	31 kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179	6.0 kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180	5.1 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179	38 kJ/m²

Supplier Join

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index