Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 300 MRC USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | MRC USA/300 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 53 J/m |
| Mechanical properties | Test Condition | Test Method | MRC USA/300 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 70 % |
| tensile strength | 断裂 | ASTM D638 | 79.3 MPa |
| Flexural modulus | ASTM D790 | 2690 MPa | |
| bending strength | ASTM D790 | 108 MPa | |
| Rockwell hardness | R级 | ASTM D785 | 119 |
| physical property | Test Condition | Test Method | MRC USA/300 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.2 % |
| Water absorption rate | 24hr | ASTM D570 | 1.6 % |
| density | ASTM D792 | 1.13 g/cm³ | |
| relative viscosity | ASTM D789 | 50 mPa·s |
| Thermal performance | Test Condition | Test Method | MRC USA/300 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 63.9 °C |
| melting temperature | ASTM D789 | 215 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 160 °C |
Contact Us
Get App
Top