Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP PP TM 40-1M Poly Plastic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Poly Plastic/ PP TM 40-1M |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -40°C | 15 kJ/m² | |
| 20°C | 32 kJ/m² | ||
| Charpy Notched Impact Strength | 20°C | 4.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Poly Plastic/ PP TM 40-1M |
|---|---|---|---|
| Volume resistivity | 1E+15 ohms·cm |
| Mechanical properties | Test Condition | Test Method | Poly Plastic/ PP TM 40-1M |
|---|---|---|---|
| Flexural modulus | 23°C | 3000 MPa | |
| Tensile strain | 断裂 | 37 % | |
| bending strength | 32.0 MPa | ||
| tensile strength | 屈服 | 25.0 MPa |
| physical property | Test Condition | Test Method | Poly Plastic/ PP TM 40-1M |
|---|---|---|---|
| melt mass-flow rate | 230°C/2.16kg | 3.1 g/10min | |
| Shrinkage rate | 0.50to0.70 % | ||
| density | 1.24 g/cm³ |
| Thermal performance | Test Condition | Test Method | Poly Plastic/ PP TM 40-1M |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：-20到110°C | 6E-06 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | 115 °C | |
| melting temperature | 164 °C |
Contact Us
Get App
Top