Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MDPE ETILINAS BPD 4038 POLYETHYLENE MALAYSIA SDN BHD
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | POLYETHYLENE MALAYSIA SDN BHD/ETILINAS BPD 4038 |
|---|---|---|---|
| Shore hardness | 邵氏D,1秒 | ISO 868 | 58 |
| Mechanical properties | Test Condition | Test Method | POLYETHYLENE MALAYSIA SDN BHD/ETILINAS BPD 4038 |
|---|---|---|---|
| Flexural modulus | ISO 178 | 750 MPa |
| Electrical performance | Test Condition | Test Method | POLYETHYLENE MALAYSIA SDN BHD/ETILINAS BPD 4038 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 20 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| dielectric constant | 1MHz | IEC 60250 | 2.50 |
| Dissipation Factor | 1MHz | IEC 60250 | 1E-03 |
| physical property | Test Condition | Test Method | POLYETHYLENE MALAYSIA SDN BHD/ETILINAS BPD 4038 |
|---|---|---|---|
| melt mass-flow rate | 190°C/5.0kg | ISO 1133 | 1.3 g/10min |
| density | ISO 1183 | 0.937 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 0.30 g/10min |
| Thermal performance | Test Condition | Test Method | POLYETHYLENE MALAYSIA SDN BHD/ETILINAS BPD 4038 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：20到60°C | ASTM D696 | 1.5E-04 cm/cm/°C |
| brittle temperature | ASTM D746 | -100 °C | |
| vicat | ISO 306/A | 116 °C |
Contact Us
Get App
Top